Warning: Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
Introduction
Front View
1. Handle: Pull to slide the module out; push to slide the module in.
22. LCD Monitor: After sliding the module out, flip up the cover to access the LCD monitor, keyboard and touch pad.
3. Keyboard
44. Slide Release: Mechanism to lock the drawer when the console is not in use, preventing it from accidentally sliding open. To slide the the console out, you must first release it by moving this tab sideways.
65. Rackmounting Brackets: The brackets secure the chassis to a standard
76. Touch Pad
| 1 | |
2 |
| |
3 |
| |
5 |
| |
6 |
| |
4 | 7 | |
5 | ||
|
87. Console and LCD Controls: The controls located here include the console power on/off button, and the buttons used to control the position and picture setting of the LCD display. See “LCD OSD (On- Screen Display) Configuration,” on the next page, for details.
Rear View
1. Console Port Section: The KVM cable kit (included) to connect the console to your server or KVM switch plugs in here.
2. Power Socket: The AC power cord plugs in here.
2 | 1 |
Installation
Refer to the example installation diagram below as you perform the following steps:
11. Plug the cable kit (provided with this unit) into the console ports on the
22. Plug the keyboard, monitor, and mouse connectors on the other end of the cable kit into their respective ports on the server or KVM.
33. Connect the power cord to the
44. Power up the connected server or KVM.
55. Turn on the
Note: The example diagram below shows the
2 |
1 |
3 |
2 |
