Rackmounting
The
Standard Rackmounting
The standard rackmounting brackets that come with the
Optional Rackmounting
If there is not enough clearance for the unit to slide into the rack when the rear flanges face outward, the problem can be resolved with the following procedure:
1.Locate the two included mounting brackets.
2.Turn the brackets so that the flanges face inward; then screw them back into the chassis.
Note: Be sure to leave a 13mm gap between the flange and the rear of the chassis in order to have enough room to screw the tab to the flange (referred to in step 4).
3.Slide the unit into the rack.
4.Screw the metal tabs to the rear flanges.
5.Secure the unit to the rack with the front flanges and rear tabs.
The
Steps
Steps
7