Tripp Lite B118-302-R, B118-304-R 3.

To perform a cascaded installation:

1 Connect the ﬁ rst-level splitter to the HDMI source (using the integral cable on the 2-port B118-302-R or a

P568-series cable with the 4-Port B118-304-R).

2 Using a P568-series cable, connect a B118-304-R splitter or a display to any available port on this ﬁ rst level

splitter.

3 Using a P568-series cable, connect a B118-304-R splitter or a display to any open port of any second-level

splitters.

4 Using a P568-series cable, connect a display to any port on the third-level splitters.

5 Connect the Power Adapter to the ﬁ rst-level splitter, plug it in, and power it ON.

6 Connect the Power Adapter to the second-level splitters, plug them in and power them ON.

7 Connect the Power Adapter to any third-level splitter, plug it in, and power it ON.

8 The Output Port LEDs will illuminate when the ports are connected to powered-on displays.

Notes:

a) ALL splitters in a cascaded installation must be connected to an AC power source.

b) The Power LED on the B118-304-R only will illuminate when the splitter is plugged into a power source.

c) Use only the power adapters that are included with the splitters.

d) It is recommended that you plug the power adapters into a Tripp Lite surge suppressor (sold separately).

e) Longer ranges are possible by using higher-gauge cable, or at resolutions lower than 1080p. Contact

Tripp Lite for more information.

2.3 Extending Distance to Connected Display

An HDMI extender or signal booster (Tripp Lite Model B122-000) can increase the distance between the

splitter and connected displays or cascaded splitters to up to 130 ft. (40 m) or more.* By placing a splitter

between each connection, the total distance between source and any display is 260 ft. (80 m) or more.*

Suggested Setup: Extended Standalone Installation

Suggested Setup: Extended Cascaded Installation

* Longer ranges are possible by using higher-gauge cable, or at resolutions lower than 1080p. Contact Tripp Lite for more information.

2.2 Cascaded Installation (Continued)

2. Installation (Continued)

TV Display

Source B118-304-R

B122-000

TV Display

Source

B118-304-R

B122-000

B118-304-R

B122-000

B118-304-R

B122-000 B122-000

A maximum length 16 ft. ( Part # P568-016)

C maximum length 50 ft. ( Part # P568-050)

D maximum length 100 ft. ( Part # P568-100)

All cables are Tripp Lite P568-series HDMI M/M cables:

B122-000 HDMI v1.3 Signal Extender

B123-001 HDMI v1.3 Active Extender Cable

B125-150 HDMI v1.3 HDMI over Cat5 Extender

P166-001-A HDMI v1.3 Wallplate with Signal Booster

P167-000 HDMI v1.3 over Cat5 Wallplate Extender Kit

D A

C C C C

A A A A

Tripp Lite offers a full line of HDMI extenders/signal boosters:

200805026 93-2788 B118-304-R 4-port HDMI Splitter OM.indd 3200805026 93-2788 B118-304-R 4-port HDMI Splitter OM.indd 3 7/2/2008 9:51:56 AM7/2/2008 9:51:56 AM