Tripp Lite B125-101-60-WP Product Features, Optional Accessories, Installation and Operation

Product Features

•B125-101-60 – Extend a 1080p (60Hz) signal up to 150 ft. using Cat6 cabling, or up to 100 ft. using Cat5 cabling

•B125-101-60-WP – Extend a 1080p (60Hz) signal up to 125 ft. using Cat6 cabling, or up to 75 ft. using Cat5 cabling

•Supports up to 7.1 channel surround sound audio

•Built-in Equalization control to adjust the video image

•HDCP and 3D compatible

Optional Accessories

•N202-Series Cat6 24Awg, solid wire patch cables

•P568-Series High Speed HDMI cables

Installation and Operation

Refer to the installation diagrams below as you perform these steps.

Note:

1.Test to make sure the entire installation works properly before pulling cables through ceilings/walls.

2.To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge size higher than 24Awg will result in shorter extension distance. All Tripp Lite N202-Series Cat6 cables are made with 24Awg, solid wire cabling.

3.Make sure the power to all devices you are connecting to is turned off prior to installation.

BLU-RAY

1080p (6o Hz)

TMDS

UP TO 150 ft. (Cat6)

UP TO 100 ft. (Cat5)

		DDC
	LOCAL	REMOTE	1080p (6o Hz)
TRANSMITTER		RECEIVER

B125-101-60 Installation Diagram

2

201109193-93-3144.indd 2 10/7/2011 2:29:40 PM