4
Installation
Note: Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
1 FollowtheinstructionsthatcomewiththeB132-004LocalUnitbefore
connectingtheB132-100RemoteUnitorB132-100-WPWallplate.
2 For the B132-100:UseCat5e/6cabletoconnectoneoftheOutputports
ontheB132-004LocalUnittotheInputportontheB132-100Remote
Unit.
3 For the B132-100-WP:Usetheincluded110Punchdowntooltoconnect
eachofthecoloredwiresinsidetheCat5e/6cabletothecorresponding
areasofthe110Punchdownconnector,andthenconnecttheotherend
oftheCat5e/6cabletoanOutputportontheB132-004LocalUnit.
4 ConnectamonitortotheOutputportoftheB132-100RemoteUnitor
B132-100-WPWallplateusingaTrippLiteP502-SeriesVGAcable.
5 Firstturnonthemonitor,andthenturnonthecomputerconnectedto
theB132-004’sSourceport.Ifyourpictureistoodark,orisdisplaying
a“ghostingeffect,”usethescrewdriverincludedwiththeB132-100to
adjusttheEqualizationandGaincontrols.
B132-100
B132-004 Local Unit
B132-100WP
200901112 93-2866.indd 4 2/12/2009 2:51:35 PM