Tripp Lite DC-to-AC Inverter Specifications, 1111 W. 35th Street Chicago, IL 60609 USA

Specifications

MODEL NUMBER:	PV750UL	PV750FC	PV1250UL	PV1250FC
DC Input Volts (Nominal):	12 VDC	12 VDC	12 VDC	12 VDC
DC Input Voltage Range:	10 - 15 VDC	10 - 15 VDC	10 - 15 VDC	10 - 15 VDC
DC Input Connection:	User-Supplied Cables	User-Supplied Cables	User-Supplied Cables	User-Supplied Cables
Output Volts (Nominal):	120 VAC, ± 5%	120 VAC, ± 5%	120 VAC, ± 5%	120 VAC, ± 5%
Output Frequency (Nominal):	60 Hz, ± 0.5%	60 Hz, ± 0.5%	60 Hz, ± 0.5%	60 Hz, ± 0.5%
Output Waveform:	Modified Sine Wave	Modified Sine Wave	Modified Sine Wave	Modified Sine Wave
Efficiency:	Up to 94%, depending on load	Up to 94%, depending on load	Up to 94%, depending on load	Up to 94%, depending on load
	and temperature	and temperature	and temperature	and temperature
Continuous Power (@ 20 C):	750 W	750 W	1250 W	1250 W
OverPower™ Peak Surge Power:*	1125 W	1125 W	1875 W	1875 W
Double Boost™ Peak Surge Power:*	1500 W	1500 W	2500 W	2500 W
DC Fuse Rating (UL Recognized):	200 Amp	200 Amp	200 Amp	200 Amp

*OverPower duration (up to 1 hour). DoubleBoost duration (up to 10 seconds). Actual duration depends on battery age, battery charge level and ambient temperature.The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

This product designed and engineered in the USA.

Minimum Recommended Cable Sizing Chart†

Always loosely twist each pair of cables together before connecting them separately to the appropriate DC terminal on the Inverter (positive or negative). Use in conjunction with DC wiring connection instructions in the Battery Connection section.

Wire Gauge

2 Conductors

Watts	6	4	2	0	00
500	15 ft	25 ft	39 ft	62 ft	79 ft
700	11 ft	18 ft	28 ft	44 ft	56 ft
1000	N/R	12 ft	20 ft	31 ft	39 ft	* Only applies to models with “UL” in
2000	N/R	N/R	N/R	16 ft	20 ft
						their model numbers.
2400	N/R	N/R	N/R	13 ft	16 ft

†N/R = Not Recommended. NOTE: Acceptable power is directly related to cable length (i.e. - the shorter the cable, the better the performance)

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

Tripp Lite Inverters include a Battery Charge Conserver (Load Sense) Control which saves battery power by allowing users to set the minimum load level at which the unit’s inverter turns on. Users can significantly reduce the No Load DC Input Current to a very low amperage power level with the use of this control.

1111 W. 35th Street • Chicago, IL 60609 USA

Customer Support: 773.869.1234 • www.tripplite.com

200501167 93-2427