Tripp Lite HT810ISOCTR owner manual Safety, Front Panel

Safety

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

This manual contains instructions and warnings that should be followed during the installation and operation of all Tripp Lite Console Component Power Centers. Failure to heed these warnings will void your warranty.

•The Console Component Power Center features an internal protection that will disconnect the surge- protective component at the end of its useful life but will maintain power to the load—now unprotected.

•Do not connect the Console Component Power Center to an ungrounded outlet. Do not use with 2-wire extension cords or adapters. Do not plug extension cords into the Console Component Power Center.

•The Console Component Power Center is designed for indoor use only. Install the Console Component Power Center away from heat-emitting appliances such as radiators or heat registers. Do not install where excessive moisture is present.

•Never install electrical, telephone, network or coaxial wiring during a lightning storm.

•Do not drill into any part of the housing or open the housing for any reason. There are no user- serviceable parts inside.

Features

J A B C D E F G H I

Front View

K L M N J I

Rear View

Front Panel

APower Switch with Integrated Circuit Breaker: The switch turns power on and off at the outlets. The circuit breaker integrated into the switch protects against dangerous system overload. If the total load on the Console Component Power Center's outlets exceeds 12 amps, the circuit breaker will trip and power will be turned off at all outlets. Reduce the load by unplugging some devices. Press the switch/circuit breaker to the “OFF” position and then to the “ON” position to restore power.

B“Protected” LED: indicates the surge suppression components are intact and providing complete protection against surges. If this LED does not illuminate, some of the surge suppression components are not functioning, and the unit should be replaced. Call Tripp Lite Customer Support at (773) 869- 1234.

C“Grounded” LED: indicates wall outlet is grounded and surge protection can properly function. If this light DOES NOT illuminate and power is present, consult a qualified electrician to examine your outlet's wiring.

D“Power” LED: indicates AC power is available at the wall outlet.

E“Switched” LED: indicates that AC power is available at the Console Component Power Center's outlets.

2