1
Copyright © 2000 Tripp Lite. All rights reserved.
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Owner's Manual
IBV-12Diagnostic Surge Suppressor (120V)ESPAÑOL : p. 4FRANÇAIS : p. 7

Storage & Service: p. 5

Specifications: p. 6
Warranty & Insurance: p. 6
• Install your surge suppressor indoors, away from excess moisture, heat and dust.
• Connect your surge suppressor to a three-wire, grounded AC power outlet. Do not
remove or modify the ground pin of the surge suppressor's plug. Do not use two-
prong adapters with the surge suppressor's plug.
• The total power draw of all equipment connected to your surge suppressor should
not exceed 12 amps.
• Your surge suppressor does not require maintenance. Do not open your surge
suppressor for any reason. There are no user-serviceable parts inside.

Safety

Quick Installation

Basic Operation: p. 4 - 5

Safety: p. 2
Plug surge suppressor into a three-
wire, grounded 120V electrical outlet.
The surge suppressor cannot provide full protection unless it is
plugged into a properly wired and grounded outlet.
Flip surge suppressor’s ON – OFF
switch ON (switch will light up.)
When this switch is lit, it indicates that AC power is enabled at the
surge suppressor's outlets.
Plug the power cords of your
electrical equipment into your surge
suppressor's outlets.
Your electrical equipment is now protected from AC surges on the
power line.
2
1
3
200001215 IBV-12 ( En, Fr, Sp).p65 8/11/00, 3:36 PM1