Tripp Lite IS250 warranty Specifications, Overview, Input, Physical

Tripp Lite Isolator series isolation transformers offer complete transformer-based line isolation, continuous noise filetering and enhnanced common mode surge suppression

Supports combined loads up to 250 watts continuous/2.1A at 120V

Isolation transformer with Faraday Shield offers 100% isolation from the input AC line

Neutral to ground bonding at the secondary eliminates common mode noise and provides an isolated ground reference for sensitive equipment

Isolation transformer design serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades Removes EMI/RFI noise, utility switching transients, background spikes and power problems generated by other on-site loads, utility grid-switching and lightning related surges

Line isolation with additional surge suppression components offer continuous line filtering of a full range of power line noise in all modes

Active filtering with no wearable parts reduces surges in the worst of power environments to harmless levels

Includes 2 widely-spaced NEMA5-15R output receptacles, 6 ft power cord, circuit breaker overload protection and lighted power switch

Rugged all-metal housing ships ready for upright tower or wallmount installation 2 year product warranty

Specifications

OVERVIEW

Amp Capacity	2.1A at 120V AC
Efficiency	96%
Form Factor	Small tower format, wall mountable
Input Plug Type	NEMA 5-15P
Let-through Voltage	L-N: 250V L-G: 250V N-G: 0.5V
(Combination Wave)
Let-through Voltage (Ring	L-N: 20V L-G: 20V N-G: 0.5V
Wave)
Noise Suppression Rating	35-65 DB
Nominal Voltage / Frequency	120V / 60Hz
Output Receptacle Qty / Type	2 NEMA 5-15R
Over Current Protection	Yes, 2A circuit breaker
Shipping Weight	13.80 lbs. / 6.26 kg
Suppression Joule Rating	680 Joules Total (510 joules input / 170 joules output)
Surge Test Conditions	Per ANSI/IEEE C62.41 - IEEE587 Cat. A & B test waveforms
Total Harmonic Distortion	less than 1%
Transformer Type	Low impedence transformer-based line isolation transformer
Unit Dimensions (HWD/in.)	4.5 x 4.75 x 7.75
VA / Watt Capacity	250
Warranty	2 year warranty
INPUT
Input cord length	6.00 ft. / 1.83 m
PHYSICAL

Cooling method

Convection

More information, including related products, owner's manuals, and additional technical specifications, can be found online at

www.tripplite.com/en/products/model.cfm?txtModelID=226.

©2009 Tripp Lite. All Rights Reserved.