Tripp Lite LS1006M, 93-2024 Save These Instructions, Line Conditioner Location Warnings

Models: 93-2024 LS1006M

1 7
Download 7 pages 47.92 Kb
Page 2
Image 2
SAVE THESE INSTRUCTIONS

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite line conditioners. Failure to heed these warnings will void your warranty.

Line Conditioner Location Warnings

Install your line conditioner indoors, away from excess moisture and heat, direct sunlight, and dust and other conductive contaminants.

For best performance, keep the indoor temperature between 32° F and 104° F (between 0° C and 40° C).

Leave adequate space around all sides of the line conditioner for proper ventilation.

Line Conditioner Connection Warnings

Connect your line conditioner directly to a three-wire, grounded AC power outlet. Do not remove or modify the ground pin of the line conditioner's plug. Do not use adapters that would eliminate the line conditioner’s connection to ground.

Do not use extension cords between the line conditioner and the AC outlet. If necessary, a Tripp Lite surge suppressor may be used between the line conditioner and the AC outlet.

If you are connecting your line conditioner to a motor-powered AC generator, the generator must provide clean, filtered computer-grade output. Connecting your line conditioner to a generator will void its Ultimate Lifetime Insurance.

Equipment Connection Warning

Do not use Tripp Lite line conditioners for life support applications in which a malfunction or failure of a Tripp Lite line conditioner could cause failure or significantly alter the performance of a life-support device.

Line Conditioner Maintenance Warning

Tripp Lite line conditioners require no maintenance. Keep the line conditioner dry at all times. DO NOT open the unit for any reason.

2

Page 2
Image 2
Tripp Lite LS1006M Save These Instructions, Line Conditioner Location Warnings, Line Conditioner Connection Warnings