Tripp Lite Network Dataline Surge Suppressors Model, Description, Nominal, Peak Pulse, Current

SPECIFICATIONS All surge suppressors listed have component response times of less than 1 picosecond.

Model:	Description:	Nominal	Peak Pulse
		Clamping Voltage:	Current:
DHUB
DHUB-18V	DHUB: RJ45, 8-port
	ethernet, token ring	7.5 volts, protecting	750 amps
	RS422/423/485, AS400/
	Sys3x protector for hubs,	wires 1-8 on all ports.
	repeaters, terminal
	servers, MUXs, MAUs,
	etc.*
	DHUB-18V:RJ45, 8-port	18 volts, protecting	340 amps
		wires 1-8 on all ports.
	RS 232 protector for
* Supplied with eight 4” RJ45 patch cables.	multiport serial devices.*
DRS232
	RJ45/RJ11 protector for
	100Base-T4, RS-232 on	18 volts, protecting wires	340 amps
	twisted pair (wires 1-8) or
		1-8.
	ISDN “S/T” interfaces.
	Supplied with 4” RJ45
	patch cable.
DNET1	RJ45 100Base-T, 10Base-T,
	Token Ring, RS422, AS400/	7.5 volts, protecting	750 amps
	Sys3x protector for NICs,
	hubs, routers, etc. Supplied	wires 1-8.
	with 4” RJ45 patch cable.
DSUT1CSU	RJ45/RJ11 protector for
	nonspan powered T-1
	equipment , digital data	60 volts, protecting wires	200 amps
	service CSUs/DSUs, ISDN
	“U” interfaces or other	1-8.
	digital lines. Supplied
	with 4” RJ45 patch cable.
DTEL2
	RJ45/RJ11 for modems,	260 volts, protecting	250 amps
	answering and fax
	machines. Supplied with	center 4 wires (2 CO-
	4” RJ11 patch cable.	lines).
DB9	Serial DB9 RS-232
	protector for male or
	female ports of data
	terminal and computing	18 volts, protecting	340 amps
	equipment including
	PCs, modems, etc. (any	pins 1-9 and chassis.
	male or female 9 pin
	port). Male/Female
	genders are reversible
	with reversible
DB15AUI	thumbscrews.
		7.5 and 18 volts,
	DB15 ethernet AUI		750 amps
		protecting all IEEE
	protector.
		802.3 pins.

2