RV1250ULHW serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger

Supports 120V AC output from a 120V AC line power source or 12V DC battery source

16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time

1250 watts continuous AC output in inverter mode, 2400 watts continuous AC output in AC mode

Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)

3 stage, selectable 14/55 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging

Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank

Protected hardwire output passes 120V line power or inverter output through to connected equipment

Reliability enhanced large-transformer design tested to UL (USA) and CSA (Canada) standards

Moisture-resistant construction enables vehicular or marine operation in high humidity environments

3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings

Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts

Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings

Resettable 12A charger AC input breaker and resettable 20A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures

Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system

Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop

Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged

Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged

Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change

Includes battery temperature sensor with 20 foot cable to prolong battery life by adjusting the charge level based on battery temperature Automatic Generator Starter jack enables user configuration of automatic generator startup as inverter batteries drop to 11.5VDC and generator shutoff as inverter batteries are recharged to 14.1VDC

Specifications

OVERVIEW

Intended Application

RV/Marine

 

 

SYSTEM OVERVIEW

 

Voltage compatibility

12V DC / 120V AC

 

 

Frequency

60 Hz

compatibility

 

 

 

OUTPUT

 

Output watts

1250W (continuous) / 2500W (peak)

 

 

Output nominal

120V

voltage

 

 

 

Output voltage

LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):

regulation

Maintains PWM sine wave output voltage of 120 V AC (+/-5%).

 

 

Output frequency

60 Hz (+/- 0.3 Hz)

regulation

 

 

 

Outlet quantity / type

Hardwire

 

 

Overload protection

Includes 12A input breaker dedicated to the charging system and 20A output breaker for AC output loads

 

 

Continuous output

1250

capacity (watts)

 

 

 

Page 2
Image 2
Tripp Lite RV1250ULHW owner manual Specifications, System Overview, Output

RV1250ULHW specifications

The Tripp Lite RV1250ULHW is a robust power inverter designed specifically for RVs, boats, and other mobile applications. This innovative device transforms conventional 12V DC power from your vehicle’s battery into 120V AC power, enabling users to run a variety of household appliances and electronic devices while on the go. With its impressive 1250W continuous output and 2500W peak power, the RV1250ULHW is well-suited to power tools, kitchen appliances, and entertainment systems, making it an essential accessory for outdoor enthusiasts and travelers.

One of the key features of this inverter is its built-in safety protections. The RV1250ULHW includes over-voltage, under-voltage, short-circuit, and over-temperature protections. These safeguards not only ensure the longevity of the inverter but also protect connected devices from potential damage due to electrical fluctuations. The inverter is equipped with a cooling fan that operates to prevent overheating during extended use, maintaining optimal performance in various conditions.

The Tripp Lite RV1250ULHW also stands out for its user-friendly design. It features multiple outlets, including a standard three-prong outlet and USB ports, allowing for simultaneous charging of multiple devices. This versatility means that whether you're using a laptop, charging a smartphone, or powering a small refrigerator, the inverter can handle it all with ease.

Portability is another characteristic of the RV1250ULHW. Weighing just over 10 pounds, it's lightweight enough to be easily transported or stored in an RV cabin or boat compartment. The inverter's compact size does not compromise its durability; it's built with high-quality materials that can withstand the rigors of travel.

Incorporating advanced technology, the Tripp Lite RV1250ULHW features a pure sine wave output which is particularly important for sensitive electronics. This means that the power produced is cleaner and more reliable compared to modified sine wave inverters, making it safe for devices like computers, LED TVs, and audio equipment.

In summary, the Tripp Lite RV1250ULHW is a powerful, portable, and safe inverter packed with features that make it an excellent choice for anyone seeking reliable power in their RV or mobile setup. Whether you're embarking on a weekend getaway or a cross-country road trip, the RV1250ULHW ensures that you can enjoy the comforts of home no matter where the journey takes you.