Tripp Lite RV3012OEM Input, Battery, Leds Alarms & Switches, Surge / Noise Suppression, Physical

Peak output capacity	6000
(watts)
INPUT
Input connection	DC INPUT: Set of 4 DC bolt-down terminals (2 red / 2 black). AC INPUT: hardwire (2 input circuits - see manual)
type
Input cord length	DC INPUT: User supplies cabling. 0 gauge or larger (see manual). AC INPUT: hardwire
Recommended	DC INPUT: Requires 12VDC input source capable of delivering 290A for the required duration (when used at full
Electrical Service	continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
	applications, professional hardwire
Maximum input	DC INPUT: Full continuous load - 282A at 12VDC. AC INPUT: 40 amps total (20A line 1 / 20A line 2) at 120VAC with full
amps / watts	inverter and charger load (25A max charger-only from line 1 / combined input load to support charger and AC output is
	automatically controlled
BATTERY

Expandable battery runtime

DC system voltage

Battery recharge rate

Runtime is expandable with any number of user supplied wet or gel type batteries

12V

35A / 140A (selectable)

LEDS ALARMS & SWITCHES

Front panel LEDs

Switches

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode. In AC uninterruptibl

SURGE / NOISE SUPPRESSION

AC surge	450 joules AC surge suppression included
suppression
PHYSICAL
Shipping weight (lbs)	67.7
Shipping weight (kg)	30
Shipping	15.25 x 16 x 24
Dimensions (HWD/in)
Shipping	38.7 x 40.6 x 60.9
Dimensions
(HWD/cm)
Unit weight (lbs)	62.6
Unit weight (kg)	28.2
Unit Dimensions	9.75 x 11.5 x 16.75
(HWD/in)
Unit Dimensions	24.8 x 29.2 x 42.5
(HWD/cm)
Material of	Steel
construction
Form factors	Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
supported	information)
Cooling method	Multi-speed fan
Style	Heavy-duty with built-in battery charger
ENVIRONMENTAL
Relative Humidity	0-95% non-condensing

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

16.6milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications)