Tripp Lite owner manual Owner’s Manual Addendum, Model RV612ENT, PAGE 2R CHANGE, Switch Modes

Owner’s Manual Addendum

Model: RV612ENT

PowerVerter® RV Series (v. 3.0)	1111 W. 35th Street, Chicago, IL 60609
DC-to-AC Inverter (with AC Power Pass-Through and Automatic Transfer Switching)	(773) 869-1234 • www.tripplite.com

The RV612ENT provides all of the features and functions of the RV612ULH described in the accompanying owner’s manual with one exception—the RV612ENT does not include a battery charger. However, the RV612ENT will pass through utility- or generator-supplied AC power (when available) and will automatically switch to inverting DC power from connected batteries to power connected equipment when utility- or generator-supplied AC power is unavailable.

Since the RV612ENT does not feature a battery charger, the following operational feature changes apply:

PAGE 2R CHANGE

Specifications for the RV612ENT are identical to the RV612ULH with the exception of battery charger specifications, which do not apply.

PAGE 4R CHANGE

2)Operating Mode Switch: controls RV612ENT operation. The “AUTO/REMOTE” setting ensures your equipment receives constant, uninterrupted AC power. It also enables the RV612ENT to be remotely monitored and controlled with an optional remote module (Tripp Lite model APSRM2, sold separately or included with select models). The “OFF” setting allows you to disable the inverter and prevent AC power from being passed through to equipment. The “INV OFF” setting allows you to disable the inverter while still allowing AC power to pass through (when available) to equipment.

4)BATTERY Indicator Lights: intuitive “traffic light” signals show approximate charge level of your battery when the RV612ENT is in invert mode (operating from inverted DC battery power).

PAGE 5R CHANGE

Switch Modes

“AUTO/REMOTE”: Switch to this mode when you need constant, uninterrupted AC power for connected appliances and equipment. The RV612ENT will supply AC power to connected equipment while utility-or generator-supplied AC power is present. Since the inverter is ON (but in Standby) in this mode, it will automatically switch to your battery system to supply AC power to connected equipment in the absence of a utility/generator source or in over/under voltage situations. “AUTO/REMOTE” also enables an optional remote control module (Tripp Lite model APSRM2, sold separately) to function when connected to the unit.

“INV OFF”: Switch to this mode when you are not using connected appliances and equipment in order to conserve battery power by disabling the inverter. The RV612ENT will continue to supply AC power to connected equipment while utility- or generator-supplied AC power is present. However, since the inverter is OFF in this mode, it WILL NOT supply AC power to connected equipment in the absence of a utility/generator source or in over/under voltage situations.

“OFF”: Switch to this mode to shut down the RV612ENT completely, preventing the inverter from drawing power from the batteries, and preventing utility AC from passing through to connected equipment. Use this switch to automatically reset the unit if it shuts down due to overload or overheating. First remove the excessive load or allow the unit to sufficiently cool (applicable to your situation). Switch to “OFF”, then back to “AUTO/REMOTE” or “INV OFF” as desired. If unit fails to reset, remove more load or allow unit to cool further and retry.

Note: all other references on this page to the “CHARGE ONLY” setting can be replaced by the “INV OFF” setting.

BATTERY Indicator Lights: when the RV612ENT is in invert mode (operating from inverted DC battery power), its BATTERY Indicator Lights will function as indicated in the accompanying owner’s manual—with the exception of the charger shutdown fault condition, which is not applicable. When the RV612ENT is in line mode (operating from utility- or generator-supplied AC power), the red BATTERY Indicator Light will be illuminated. This does not indicate battery capacity; it only indicates that the RV612ENT is in line mode.

PAGE 6R CHANGE

Note: the A1 and A4 DIP Switches on the RV612ENT have no function.

PAGE 12R CHANGE

Note: all references on this page to the “CHARGE ONLY” setting can be replaced by the “INV OFF” setting. All references to the unit’s internal charger do not apply.

Copyright © 2003. PowerVerter® is a registered trademark of Tripp Lite. All rights reserved.

The policy of Tripp Lite is one of continuous improvement. Specifications and features are subject to change without notice.

200309118 93-2193