Tripp Lite SMART750RMXL2U warranty Specifications, System Overview, Output, Input, Battery

Supports 2U rackmount and upright tower applications (2-9USTAND accessory sold separately)

Full time sine wave output offers guaranteed compatibility with all equipment types

Supports a max load of 750VA for 12.5 minutes and a half load of 375VA for 30 minutes

Extended runtime available with optional BP24V15RT2U, BP24V28-2U (limit of one per UPS) or BP24V70-3U (multi-pack compatible) external battery packs

Maintains regulated 120V nominal output 83 to 147V

750VA/450 watt power handling capability supports a variety of sensitive electronic loads

Includes 6 UPS supported outlets arranged in 2 individually controllable load banks

Built in USB and DB9 serial ports support remote monitoring of UPS and site power conditions

Built in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary

Two year warranty with $250,000 connected equipment insurance (USA & Canada only)

Mounting hardware included for 4 post rackmount enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM, compatible with upright tower installation with included hardware

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120V AC
Frequency	60 Hz
compatibility
OUTPUT
Output VA	750
Output watts	450
Output nominal	120V AC
voltage
Output voltage	LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC
regulation
Output frequency	LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
regulation
Outlet quantity / type	6 NEMA 5-15R
Customized load	Includes 2 load banks, each with 2 outlets that support load shedding and remote reboot on demand of locked network
management	devices. Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for
receptacles	servers and other critical devices.
Overload protection	Via 15A input circuit breaker
INPUT
Maximum input amps	6.8A
Input connection	NEMA 5-15P
type
Input cord length	10 ft / 3m
Recommended	120V 15A
Electrical Service
BATTERY
Full load runtime	12.5 minutes
Half load runtime	30 minutes
Expandable battery	Extended runtime available with optional BP24V15RT2U, BP24V28-2U (limit of one per UPS) or BP24V70-3U
runtime	(multi-pack compatible) external battery packs

Connects to UPS via

DC connector

DC system voltage

24VDC