Plug and Play

This monitor complies with the DDC1™* and DDC2B™* which are the Display Data Channel (DDC) standards of VESA.

When a DDC1 host system is connected, the monitor sycnchronizes with the V. CLK in accordance with the VESA standards and outputs the EDID (Extended Display Indentification) to the data line.

When a DDC2B host system is connected, the monitor automatically switches to the DDC2B communication.

DDC™ is a trade mark of the non-profit organization, Video Electronics Satandard Association.

Use of the Tilt-Swivel

With the tilt-swivel, this unit can be adjusted to be viewed at your desired angle within 90˚ horizontally and 20˚ vertically. To turn the unit vertically and horizontally, hold it at its bottom with both hands.

15°

45°

45°

Damper Wire

Using a white background, very thin horizontal stripes on the screen are visible as shown on the illustration. These stripes are damper wires. These wires are attached to the aperture grille inside the Trinitron tube and are there to damp vibrations of the aperture grille in order to prevent them from influencing to the picture quality.

Damper wire

Approx. 6 cm (Multiscan 17sfII only)

Approx. 6 cm

Specifications

CPD-15SF2T

Picture tube

0.25 mm aperture grille pitch

 

15Ê inches measured diagonally (14”

 

maximum viewing image) 90-degree

 

deflection

Video image area

Approx. 285 × 213 mm (w/h)

 

(11 1/4 × 8 1/2 inches)

Logical resolution

Horizontal: Max. 1280 dots

 

Vertical: Max. 1024 lines

Physical resolution

Horizontal: Max. 1024 dots

 

Vertical: Max. 768 lines

Standard image area Approx. 270 × 202 mm (w/h)

 

(10 3/4 × 8 inches)

Deflection frequency Horizontal: 31 to 65 kHz

 

Vertical: 50 to 120 Hz

AC input voltage/current

 

100 to 120 V, 50/60 Hz, 1.8 A

 

220 to 240 V, 50 – 60 Hz, 1 A

Dimensions

Approx. 368 × 373 × 384.5 mm (w/h/d)

 

(14 1/2 × 14 3/4 × 15 1/4 inches)

Mass

Approx. 13.8 kg (30 lb 7 oz)

CPD-17SF2T

 

Picture tube

0.25 mm aperture grille pitch

 

17Ê inches measured diagonally (16”

 

maximum viewing image) 90-degree

 

deflection

Video image area

Approx. 328 × 242 mm (w/h)

 

(13 × 9 5/8 inches)

Logical resolution

Horizontal: Max. 1280 dots

 

Vertical: Max. 1024 lines

Physical resolution

Horizontal: max. 1280 dots

 

Vertical: Max. 1024 lines

Standard image area Approx. 300 × 225 mm (w/h)

 

(11 7/8 × 8 7/8 inches)

Deflection frequency Horizontal: 31 to 65 kHz

 

Vertical: 50 to 120 Hz

AC input voltage/current

 

100 to 120 V, 50/60 Hz, 1.8 A

 

220 to 240 V, 50 – 60 Hz, 1 A

Dimensions

Approx. 406 × 426.5 × 451 mm (w/h/d)

 

(16 × 16 7/8 × 17 7/8 inches)

Mass

Approx. 19.0 kg (41 lb 14 oz)

Design and specifications are subject to change without notice.

8

Page 8
Image 8
Sony CPD-17SF2T, CPD-15SF2T manual Plug and Play, Use of the Tilt-Swivel, Damper Wire, Specifications