Tripp Lite SMX1200XLHG Leds Alarms & Switches, Surge / Noise Suppression, Physical, Environmental

Overvoltage correction

Direct pass through

Brownout correction

Severe brownout correction

Input voltages between 245 and 274V AC are reduced by 9%

Input voltages between 200 and 244V AC are passed through unchanged

Input voltages between 183 and 199V AC are boosted by 10%

Input voltages between 156 and 182V AC are boosted by 21%

LEDS ALARMS & SWITCHES

Front panel LEDs

Alarms

Switches

Yes, includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning

3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone)

Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

SURGE / NOISE SUPPRESSION

AC surge suppression	340 joules
AC suppression	Instantaneous
response time
EMI / RFI AC noise	Yes
suppression
PHYSICAL
Shipping weight (lbs)	48.8
Shipping weight (kg)	22
Shipping Dimensions	18.5 x 12.2 x13.4
(HWD/in)
Shipping Dimensions	46.9 x 31 x 34
(HWD/cm)
Unit weight (lbs)	45.5
Unit weight (kg)	20.5
Unit Dimensions	12.7 x 7.5 x 9.1
(HWD/in)
Unit Dimensions	31.75 x 19.1 x 23.1
(HWD/cm)
Material of	PVC
construction
Form factors	Tower
supported
Cooling method	UPS cooling via rear-exit fan
Battery Access	Battery access door allows hot swap battery replacement without powering connected equipment off
ENVIRONMENTAL
Relative Humidity	0 to 95%, non-condensing
COMMUNICATIONS
Network monitoring	Includes 2 built-in monitoring ports, 1 USB & 1 DB9
port
Software and cabling	PowerAlert UPS monitoring software is included on CD-ROM for all common network and standalone operating
included	systems. Ships with 2 cables, 1-USB to USB & 1-DB9 to DB9

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

2-4 milliseconds

Low voltage transfer to battery power

155V (resets to line power as voltage increases to 163V)