BATTERY
Full load runtime (minutes)
Half load runtime (minutes)
Expandable battery runtime
External battery pack compatibility
DC system voltage (VDC)
Battery recharge rate (included batteries)
Replacement battery cartridge (internal UPS battery replacement)
8.5min. (3750w)
20 min. (1875w)
Extended runtime supported via optional external battery packs
48
Less than 4 hours from 10% to 90%
Battery Access
Battery replacement description
VOLTAGE REGULATION
Front panel battery access door
Voltage regulation description
Overvoltage correction
Undervoltage correction
LEDS ALARMS & SWITCHES
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 170 to 282
Input voltages between 245 and 282 are reduced by 12%
Input voltages between 170 and 199 are boosted by 12%
LED Indicators
Alarms
Alarm cancel operation
Switches
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible alarm indicates
2 Switches control off/on power status and
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
UPS AC suppression response time
EMI / RFI AC noise suppression
PHYSICAL
480
Instantaneous
Yes
Installation form factors supported with optional accessories
2 post rackmount (2POSTRMKITWM); Tower
Primary form factor
UPS / Power Module dimensions in primary form factor (height x width x depth / inches)
Rackmount
5.2 x 17.5 x 25
UPS / Power Module dimensions in primary form factor (height x width x depth / cm)
13.3 x 44.4 x 63.5