Tripp Lite SMX500RT1U warranty Specifications, Output, Input, Battery

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

C14 inlet accepts user-supplied AC power cord with country specific plug

Network-grade AC surge suppression Field-replaceable, hot-swappable internal UPS batteries

Specifications

OUTPUT

Output Volt Amp Capacity (VA)

Output Watt Capacity (watts)

Output power factor

Nominal Output Voltage(s) Supported

Nominal Voltage details

Frequency compatibility

Output voltage regulation (line mode)

Output voltage regulation (Battery mode)

Built-in UPS output receptacles

Included output power cables

Surge suppression only outlets

Built-in controllable switched load banks

Output AC waveform (AC mode)

Output AC waveform (battery mode)

INPUT

500

300

0.6

220V; 230V; 240V

230v nominal inverter output voltage

50 / 60 Hz

-8%, +15%

+/- 5%

6 C13 outlet(s)

Two 1.8m IEC320-C13 to C14 load jumper cables

6 UPS outlets, 1 surge-only outlets

One switchable single-outlet C13 load bank

Sine wave

PWM sine wave

Rated input current (at maximum load)

Nominal Input Voltage(s) Supported

UPS input connection type

UPS input connection description

2.4A

230V AC

C14 inlet

C14 inlet accepts user-supplied AC power cord with country-specific plug

Input circuit breaker

8A

BATTERY

Full load runtime (minutes)

Half load runtime (minutes)

3.2min. (300w)

14.6min. (150w)