Tripp Lite SRCABLELADDER owner manual Ground Connection

3 – Installation (continued)

3-5 Installation Within Row (continued)

6After inserting the clevis pins, insert a cotter pin G through the hole at the end of each clevis pin. (The straight section of the cotter pin goes through the hole.)

G

6

3-6 Ground Connection

1After installing the SRCABLELADDER accessory, determine where to place ground brackets by noting the distance between one end of the ladder and the grounding post A at the corner of the nearest SRCABLETRAY accessory.

1 A

2Place a ground bracket B near the end of the SRCABLELADDER accessory’s leg and use a hex-head bolt C to secure it.

3Use the included hex nuts and lock washers G to connect one end of the included ground cable H to a grounding post I at the corner of the nearest SRCABLETRAY accessory and connect the other end to the grounding post J of the ground bracket attached to the

SRCABLELADDER accessory. Repeat steps 1 to 3 for the other end of the SRCABLELADDER accessory.

B
	C
2
G	J
G
I
H
3

7