Tripp Lite SU10000RT3U warranty Features, Specifications, System Overview, Output, Input, Battery

Two sets of 4-post rackmount rails (one for each of the 3U components)

One set of tower stands for upright tower configuration

PowerAlert Software, complete cabling, owner's manual with warranty information

Features

10,000VA (10kVA) on-line, double-conversion UPS system (high-voltage input/high-voltage output)

Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment

Installs in only 6 rack spaces (3U power module/3U battery pack) with a maximum installed depth of 32.5 in.

Offers 4 min. runtime at full load (10,000VA/8000W) and 10 min. at half load (5000VA/4000W). Runtime is expandable with any number of optional external battery packs

Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)

Actively converts raw incoming AC power to DC, then re-converts output to completely regulated, filtered AC output

Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V

Standard 3-wire 208V hardwire input connection

4 x NEMA L6-20R and 2 x NEMA L6-30R output receptacles

Detailed LCD panel with scroll buttons provides detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more

Network-grade AC surge and noise suppression

Zero transfer time between AC and battery operation

Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shudown, remote control and monitoring of UPS system and power data

Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling

Emergency Power Off (EPO) interface

Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status

Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading

4-post rackmount and upright tower installation accessories included; 2POSTRMKITWM 2-post rackmount hardware accessories available

Field-replaceable, hot-swappable power module and external battery packs

Attractive all-black color scheme

2-year warranty; extended warranty and service contracts available $250,000 connected equipment insurance

Specifications

SYSTEM OVERVIEW

Voltage compatibility	208V AC (200/208/220/230/240V)
Frequency	50/60 Hz
compatibility
OUTPUT
Output VA	10000
Output watts	8000
Output nominal	208V AC (200/208/220/230/240V)
voltage
Output voltage	Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total
regulation	harmonic distortion when used with computer loads
Output frequency	Regulates line frequency to 50/60Hz +/- 0.05Hz
regulation
Outlet quantity / type	4 x NEMA L6-20R, 2 x NEMA L6-30R
INPUT
Maximum input amps	200V-46.7A / 208V- 44.9A / 220V- 42.4A / 230V-40.6A / 240V-38.9A
Input connection type	Hardwire
BATTERY