Tripp Lite SUINT1500RTXL2UA Input, Battery, Voltage Regulation, Leds Alarms & Switches

Output AC waveform (AC mode)

Output AC waveform (battery mode)

INPUT

Sine wave

Pure Sine wave

Rated input current (at maximum load)

Nominal Input Voltage(s) Supported

UPS input connection type

UPS input connection description

Input circuit breaker

Phase

6.4A

200V AC; 220V AC; 230V AC; 240V AC

C14 inlet

IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

10A

Single-Phase

BATTERY

Full load runtime (minutes)

Half load runtime (minutes)

Expandable battery runtime

External battery pack compatibility

DC system voltage (VDC)

Battery recharge rate (included batteries)

Replacement battery cartridge (internal UPS battery replacement)

4.5min. (1200w)

12 min. (600w)

Extended runtime supported via optional external battery packs

BP48V24-2U(limit 1); BP48V60RT-3U(multi-pack compatible); BP48V27-2US(multi-pack compatible)

48

Less than 6 hours from 10% to 80%

RBC94-2U

Battery Access

Battery replacement description

Front panel battery access door

Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Undervoltage correction

Severe undervoltage correction

Online, double-conversion power conditioning

2% output voltage regulation during overvoltages to 275

2% output voltage regulation during undervoltages to 156

2% output voltage regulation during undervoltages to 130 (under 70% load only)

LEDS ALARMS & SWITCHES

LED Indicators

14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in rack/tower formats