Tripp Lite TM500 System Overview, Output, Input, Battery, Leds Alarms & Switches, Physical

SYSTEM OVERVIEW

Voltage compatibility 120V AC

Frequency60Hz compatibility

OUTPUT

Output VA

Output watts

Output nominal voltage

Output voltage regulation

Output frequency regulation

Outlet quantity / type

INPUT

500

300

120V AC

LINE MODE: Passes line voltage from 100-145V to connected equipment unchanged.

BATTERY MODE: PWM sine wave output 120V +/-5%

LINE MODE: Passes line frequency of 60Hz +/-10%

BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz

6 NEMA 5-15R

Input connection type

Input cord length

Recommended Electrical Service

BATTERY

NEMA 5-15P

6 ft.

15A 120V

Full load runtime

Half load runtime

DC system voltage

Typical battery lifespan

Battery recharge rate

6 minutes (500VA)

17 minutes (250VA)

12V DC

3-6 years, depending on usage

2-4 hours to 90%

LEDS ALARMS & SWITCHES

Front panel LEDs

Alarms

Switches

Front panel LEDs indicate line power status, battery power status and battery low/replace status

Audible alarm with 15 second delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front panel alarm cancel button. Once silenced, alarm will re-sound when approximately 2 minutes runtime remain.

Includes 6 front panel switches — one main on/off power switch and one dual function "alarm cancel" / "self test" button, plus 4 switches to control individual output receptacles

SURGE / NOISE SUPPRESSION

AC surge480 joules suppression

AC suppression	Instantaneous
response time
Dataline suppression	Tel/DSL
EMI / RFI AC noise	Yes
suppression
PHYSICAL
Shipping weight (lbs)	17
Shipping weight (kg)	7.7
Unit weight (lbs)	14.4
Unit weight (kg)	6.5
Unit Dimensions	2 x 13.5 x 12.5
(HWD/in)