Troy-Bilt 020242-1 How to Use ProjectPro Nozzle System, Low Pressure, Operation, High Pressure

Section 4: Operation

How to Use ProjectPro™ Nozzle System

The quick–connect on the nozzle extension allows you to switch between four different ProjectPro™ system nozzles. The ProjectPro™ nozzles vary the spray pattern as shown (Figure 12).

Figure 12 — Nozzle Spray Patterns

	Low Pressure
	Black
	Use to apply
	chemical
	High Pressure
40° Yellow	15° Orange	0° Red
2550 PSI	2900 PSI	3000 PSI
2.8 GPM	2.5 GPM	2.3 GPM

Follow these instructions to change ProjectPro™ nozzles:

1.Engage trigger lock on spray gun.

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

•NEVER exchange ProjectPro™ nozzles without locking the trigger lock on the trigger.

•DO NOT twist ProjectPro™ nozzles while spraying.

2.Pull back collar on quick–connect and pull current ProjectPro™ nozzle off. Store ProjectPro™ nozzles in holder provided on the accessory tray.

3.Select desired ProjectPro™ nozzle:

•For delicate rinse (lower pressure and higher flow), for gentle cleaning of cars/trucks, boats, RV’s, patio furniture, lawn equipment, etc., select yellow 40° ProjectPro™ nozzle (Figure 13).

Figure 13 — Delicate Nozzle

•For general rinsing (medium pressure and medium flow), ideal for most all purpose cleaning such as home siding, brick patios, wood decks, driveways and sidewalks, garage floors, etc., select orange 15° ProjectPro™ nozzle (Figure 14).

Figure 14 — General Nozzle

11