Troy-Bilt 020242-1 owner manual Operation, DO NOT get closer than 6 inches when cleaning tires

Section 4: Operation

•For maximum rinsing (higher pressure and lower flow), for stubborn or hard to reach surface such as second story surfaces, paint removal, oil stains, rust removal or other stubborn substances (tar, gum, grease, wax, etc.), select red 0° ProjectPro™ nozzle (Figure 15).

Figure 15 — Max Nozzle

•To apply chemical, applies project specific cleaners to help break down stubborn dirt and grime on a variety of surfaces, select black ProjectPro™ cleaning detergent nozzle (Figure 16).

Figure 16 — Cleaning Detergent Nozzle

4.Pull back on collar, insert selected ProjectPro™ nozzle and release collar.Tug on ProjectPro™ nozzle to make sure it is securely in place.

5.For most effective cleaning, keep ProjectPro™ nozzle from 8 to 24 inches away from cleaning surface. If you get the nozzle too close, you may damage the cleaning surface.

6.DO NOT get closer than 6 inches when cleaning tires.

12