Attaching The Blower Chute
(If Equipped)
NOTE: The bag must be removed before installing the blower chute.
8.a. Grasp blower chute with one hand and slide locking rod on mounting bracket with other hand toward engine. Use the end of mounting bracket as lever- age when sliding the locking rod. See Figure 8.
b.Slip blower chute over rim of discharge opening and release locking rod to secure chute in place.
c.Raise the nozzle height to the highest setting when using the blower chute. Refer to nozzle height adjustment in the Maintaining Your Yard Vacuum section on page 14.
NOTE: The bag/chute switch button attached to the mounting bracket must be fully depressed by the tip of front tab on the blower chute or engine will not start.
3
Setting Up
Your Yard
Vacuum
| NOTE: The bag must |
| be removed before |
| installing the blower |
Figure 8 | chute. |
|
