4
B
Operating | D |
Your Yard |
|
Vacuum |
|
| C |
| A |
| Figure 10 |
IMPORTANT |
|
Move the speed |
|
control only when the |
|
engine is running. |
|
Changing the speed |
|
control setting with the |
|
engine off can damage |
|
the yard vacuum. | "UTTONS |
| |
| )NNERN |
| &LAP |
| /UTERT&LAP |
| Figure 11 |
Figure 12
To Empty Bag
1.a. Unhook bag straps from the lower handle.
b.Unsnap bag clip from the top of lower handle. See Figure 10.
c.Grasp bag handle with one hand and pull lock rod on mounting bracket with other hand toward engine to release.
d.Lift bag off back of unit.
2.Twist the two buttons on the back of the bag to unlock and empty contents. See Figure 11. Hold bag handle and bag clip while emptying the contents.
3.Compress bag opening and fold inner flap over opening.
4.Fold outer flap over inner flap and insert buttons on the bag through metal outlets. See Figure 11.
5.Twist the buttons to lock bag. Place bag back onto unit as instructed on page 8.
To Remove Blower Chute
1.Grasp blower chute with one hand and pull lock rod on mounting bracket with other hand toward engine to release. Refer to Figure 8 on page 9.
2.Remove blower chute from rim of the discharge opening.
Using The Nozzle Vacuum
1.Place nozzle/hose vac lever in the top position on the nozzle to vacuum through nozzle. See Figure 12.
2.The spring loaded pin must be in the first hole (closest to the end of the tube) of the hose adapter to operate the nozzle vac.
3.Place both hands on top of the upper handle and fully lift the drive control against the upper handle to propel the unit over yard.
4.Use the speed control to choose either the high or low speed. The speed control may be moved either while the unit is propelling or before engaging the wheels.
IMPORTANT: Move the speed control only when the engine is running. Changing the speed control setting with the engine off can damage the yard vacuum.
12
