(See Figure 1)

3

Setting Up

Your Yard

Vacuum

Upper Handle

Drive Control

Speed Control

Wing Nut

Upper Hose

Handle Bracket

Rope Guide

Cable Guide

 

Handle Knobs

Lower Hose

Handle BracketCarriage

Screws

Lower Handle

Wing Nuts

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your machine.

NOTE: Reference to right and left hand side of the Yard Vacuum is observed from the operating position.

Opening Carton

1.Cut each corner of the carton vertically from top to bottom.

2.Remove all loose parts.

3.Remove loose packing material.

IMPORTANT

This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operat- ing your machine.

NOTE: Reference to right and left hand side of the Yard Vacuum is observed from the operating position.

Bag

Safety Glasses

Hose

 

Assembly

Bottle of Engine Oil

Blower Chute

 

Operator’s Manual

 

Figure 1

Removing Unit From Carton

1.Lift unit from the rear to detach it from underlying carton material and roll unit out of carton.

2.Check carton thoroughly for any other loose parts.

NOTE: Make sure not to crimp cables while removing loose parts or the entire unit from the carton.

Loose Parts In Carton

a.Upper and Lower Handle

b.Hose Assembly

c.Safety Glasses

d.Engine Oil (May be located in bag)

e.Bag

f.Blower Chute (If Equipped)

g.Operator’s Manual

Page 6
Image 6
Troy-Bilt 070, 071 warranty Setting Up Your Yard Vacuum, Opening Carton, Removing Unit From Carton, Loose Parts In Carton