Section 4: Operation
TILLING PATTERNS
1.When preparing a seedbed, go over the same path twice in the first row, then overlap
2.After going up and down the rows in one direction, make second passes at a right angle across the original passes (Figure 11). Again, overlap each pass to thoroughly pulverize the entire seedbed area. In very hard ground, it may take three or four passes before the desired depth is achieved.
3.If your garden is not wide enough to till lengthwise and then crosswise, then first overlap by
Figure 10: Use an overlap technique on every pass.
Figure 11: Make a second set of passes at a right angle over the first set of passes.
ATTACHMENTS
The following Tiller/Edger attachments are available where the Tiller/Edger was purchased. See your authorized dealer or contact the Factory for details.
Power Lawn Rake Attachment – Model 12575
The Power Lawn Rake will help keep your lawn healthy and vigorous. Matted grass and debris not
only looks unattractive, but
stifles lawn growth and overall health. This attach-
ment mounts without tools 
and features dozens of 
tempered steel “fingers” 
that spring off the surface
to penetrate and loosen
matted grass without dis-
turbing root growth. An 
swath covers a large lawn area quickly.
Lawn Aerator Attachment – Model 12574
Helps promote healthy, dense lawns 
by aerating and loosening the
soil to contribute to better root 
growth. Four tempered steel
tines puncture the surface
of the lawn, letting nutri-
ents more easily reach the
roots. Assembles without tools. When mounted, it
takes the place of the standard tine sections.
EDGER ATTACHMENT – MODEL 12601
The Edger Attachment makes clean 
sharp edges next to walkways, 
driveways, paths, planted
areas patios, etc.
10
