Do:

Mow up and down slopes, not across.

Remove obstacles such as rocks, limbs, etc.

Watch for holes, ruts or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low enough gear so that you will not have to stop or shift while on the slope. Always keep machine in gear when going down slopes to take advantage of engine braking action.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.

Do Not:

Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches or embankments.The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and in watchful care of an adult other than the operator.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with the safe machine operation.

Never allow children under 14 years old to operate the machine. Children 14 years and over should only operate machine under close parental supervision and proper instruction.

Use extra care when approaching blind corners, shrubs, trees or other objects that may obscure your vision of a child or other hazard.

Remove key when machine is unattended to prevent unauthorized operation.

Service

Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

a. Use only an approved container.

b.Never remove fuel cap or add fuel with the engine running. Allow engine to cool at least two minutes before refueling.

c.Replace fuel cap securely and wipe off any spilled fuel before starting the engine as it may cause a fire or explosion.

d.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

e.Never refuel the machine indoors because fuel vapors will accumulate in the area.

f.Never store the fuel container or machine inside where there is an open flame or spark, such as a gas hot water heater, space heater or furnace.

Never run a machine inside a closed area.

To reduce fire hazard, keep the machine free of grass, leaves or other debris build-up. Clean up oil or fuel spillage. Allow machine to cool at least 5 minutes before storing.

Before cleaning, repairing or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the spark plug to prevent accidental starting.

Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., excessive wear, bent, cracked). Replace with blade which meets original equipment specifications.

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly. Use all guards as instructed in this manual.

After striking a foreign object, stop the engine, remove the wire from the spark plug and thoroughly inspect the mower for any damage. Repair the damage before restarting and operating the mower.

Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. For your safety protection, frequently check components and replace with manufacturer’s recommended parts when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves and use extra caution when servicing blade(s).

5

Page 5
Image 5
Troy-Bilt 13A-344-563 manual Do Not, Children, Service

13A-344-563 specifications

The Troy-Bilt 13A-344-563 is a robust and reliable tiller that caters to both gardening enthusiasts and professional landscapers alike. Known for its durability and efficiency, this tiller is designed to make the often labor-intensive process of soil cultivation easier and more effective.

One of the standout features of the Troy-Bilt 13A-344-563 is its powerful engine. Equipped with a reliable 3.5 HP engine, this tiller is capable of tackling tough soil conditions with ease. The engine's performance ensures that gardeners can break up hard, compacted soil efficiently, allowing for better plant growth and a healthier garden.

The tiller is also designed with a large tilling width of up to 16 inches, enabling users to cover more ground in less time. This feature is particularly advantageous for those with larger gardens or landscaping projects. Alongside its width, the tiller has a tilling depth of up to 8 inches, making it suitable for a variety of soil types and gardening tasks.

The Troy-Bilt 13A-344-563 incorporates patented technologies that enhance its ease of use. One such feature is the adjustable tilling depth, which allows users to customize how deep they want to till based on the specific needs of their garden. Additionally, its rear-tine design helps to maintain stability and provides a smoother operation when maneuvering around different garden terrains.

Furthermore, the tiller boasts a user-friendly design with an ergonomic handle that reduces fatigue during prolonged use. The handles are adjustable, allowing users of various heights to find a comfortable position while operating the machine. This thoughtful design is geared towards maximizing efficiency without sacrificing user comfort.

Maintenance is also a breeze with the Troy-Bilt 13A-344-563. Its easy-access oil fill and dipstick make routine checks and changes hassle-free. Additionally, the robust construction ensures that the machine can withstand regular use over an extended lifespan.

In summary, the Troy-Bilt 13A-344-563 combines powerful performance, versatile features, and user-friendly design, making it a valuable addition to any gardener’s toolkit. Whether preparing soil for planting or cultivating existing beds, this tiller stands out for its ability to deliver reliable, effective results that promote healthy, vibrant gardens.