Troy-Bilt 2100 Controls and Features, Choke Lever, Throttle, Primer, Ignition Key, Recoil Starter, Gasoline Cap

Controls and Features 4

Auger Control

Recoil Starter

Gasoline Cap

Chute Control Handle

Chute

Assembly

Shave Plate

Auger

Choke Lever

Activating the choke control closes the choke plate on carburetor and aids in starting engine.

RUN

MARCHE

CHOKE

VOLET DE

DÉPART

	Ignition Key	Oil Fill
	Primer
			Gasoline
			Cap
Oil Fill	Throttle		Electric
	Control		Starter
			Button
	Choke
	Control		Electric
	Oil Drain	Recoil	Starter
			Outlet
		Starter

Figure 4-1

Throttle

Primer

Pressing primer forces fuel directly into engine’s carburetor to aid in cold-weather starting.

Ignition Key

The ignition key is a safety device. It must be fully inserted in order for the engine to start. Remove the ignition key when the snow thrower is not in use.

NOTE: Do not turn the ignition key in an attempt to start the engine. Doing so may cause it to break.

The throttle control is located on the rear of the engine. It regulates the speed of the engine and will shut off the engine when moved into the STOP position.

Recoil Starter

The starter handle is used to manually start the engine.

Gasoline Cap

Remove the gas cap to add fuel.

10