Maintenance

Engine

Refer to the separate engine manual for all engine maintenance instructions.

Check engine oil level before each use as instructed in the separate engine manual packed with your unit. Read and follow instructions carefully.

Clean air cleaner every 25 hours under normal conditions or once a season. Clean every few hours under extremely dusty conditions. To service the air cleaner, refer to the separate engine manual packed with your unit.

The spark plug should be cleaned and the gap reset once a season. Check engine manual for correct plug type and gap specifications.

Remove

Hex Screw

Figure 12

Removing The Flail Screen

If the discharge area becomes clogged, remove the flail screen and clean area as follows:

Stop the engine and make certain the Yard Vacuum has come to a complete stop.

Disconnect spark plug wire from spark plug and ground against the engine.

Remove the bag or blower chute (if equipped) from the unit as instructed in the OPERATION section to obtain access to flail screen. See Figure 11.

Hex Screw &

 

Flat Washer

 

Lock Nut

Flail Screen

Figure 11

Remove hex screw on right side of unit that attaches to the fail screen. It may be necessary to remove the hose bracket hanger to get access to the hex screw. See Figure 12.

Remove hex screw and flat washer on top of rear housing mounting bracket and the lock nut that secures flail screen. See Figure 11.

Remove and clean the screen by scraping or washing with water. Reinstall the flail screen.

Sharpening Or Replacing Chipper Blade

Because the engine on this unit has a tapered crankshaft, a special impeller tool (part number 753- 0900) is required to remove the impeller assembly. For further assistance, contact your local service dealer.

NOTE: When tipping the unit, empty the fuel tank and keep spark plug side up.

Disconnect the spark plug wire and ground it away from the spark plug.

Remove the front hubcaps, lock nuts, front wheels, and wave washers that attach to the pivot arm assemblies. See Figure 13.

Remove the shoulder screws, thrust and bell washers that go through the pivot arms and height adjustment brackets to the front support brace.

Pivot Arm Assembly

 

Bell Washer

 

Wave Washer

 

Hubcap

Height Adjustment

 

Bracket

 

Thrust Washer

 

Shoulder

 

Screw

Lock Nut

 

Figure 13

Remove the three screws on the upper housing that secure the nozzle cover and the nine screws that secure the lower housing to the upper housing. See Figure 14.

11

Page 11
Image 11
Troy-Bilt 24B-060F063, 24C-060F063 manual Maintenance, Removing The Flail Screen, Engine

24B-060F063, 24C-060F063 specifications

The Troy-Bilt 24C-060F063 and 24B-060F063 are remarkable string trimmers known for their power, versatility, and user-friendly designs. These tools are essential for maintaining a well-groomed lawn and tackling tough landscaping tasks, providing an array of features that make them popular among homeowners and professionals alike.

One of the main features of both models is their lightweight construction, which allows for easy maneuverability while trimming. The trimmers are equipped with a 25cc 2-cycle engine, delivering robust performance and enabling users to handle thick grass and weeds without difficulty. The combination of power and efficiency ensures that users can complete their tasks quickly and effectively.

Equipped with a straight shaft design, both the 24C-060F063 and 24B-060F063 provide extended reach, making it easier to access hard-to-reach areas such as under benches, shrubs, and along fences. This design also ensures that users can maintain a comfortable posture during operation, reducing the risk of fatigue.

The bump head feature allows for quick and easy line advancement, ensuring that users spend less time preparing their tools and more time working. With a simple bump on the ground, users can release additional line when needed, streamlining the trimming process.

Troy-Bilt has incorporated their Easy Start technology, which significantly reduces the effort required to start the engine. This feature is particularly beneficial for users who may struggle with traditional starting methods, making the trimmers accessible to a wider range of people.

Another noteworthy characteristic of these trimmers is their versatility. Both models support a variety of attachments, transforming them into multi-functional tools ready to tackle a range of landscaping tasks such as edging, cultivating, and even pruning. This adaptability offers users the convenience of using one tool for multiple applications.

Additionally, the trimmers feature ergonomic handles designed for comfort and grip, reducing strain on the hands and arms during extended use. With adjustable settings, users can customize the trimmers to suit their preferences, enhancing the overall efficiency of the task.

In summary, the Troy-Bilt 24C-060F063 and 24B-060F063 string trimmers stand out in the market due to their powerful engines, ease of use, and versatility. With their lightweight design, efficient bump head line feed, and innovative starting technology, they provide an excellent solution for anyone looking to maintain a beautiful landscape with minimal effort.