•Twist the two buttons on the back of the bag to unlock and empty contents. See Figure 7.

•Hold bag handle and bag clip while emptying the contents.

•Compress bag opening and fold inner flap over opening.

•Fold outer flap over inner flap and insert buttons on the bag through metal outlets.

•Twist the buttons to lock bag.

Buttons

Bag Clip

Inner Flap

Bag Handle

Outer Flap

Strap

Figure 7

To Remove Blower Chute (If Equipped)

•Grasp blower chute with one hand and pull lock rod on mounting bracket with other hand toward engine to release. Refer to Figure 5.

•Remove blower chute from rim of the discharge opening.

Using the Nozzle Vacuum

•Place nozzle/hose vac handle in the top position on the nozzle to vacuum through nozzle. See Figure 8.

•The spring loaded pin must be in the first hole of the hose adapter to operate the nozzle vac.

•Place both hands on top of upper handle to push unit over yard waste.

Yard waste such as leaves and pine needles can be vacuumed up through the nozzle for shredding. After material has been shredded by the flail blades on the impeller assembly, it will be discharged into catcher bag or through blower chute (if equipped). Do not attempt to shred or chip any material other than vegetation found in a normal yard (i.e. branches, leaves, twigs, etc.) Avoid fibrous plants such as tomato vines until they are thoroughly dried out. Materials such as stalks or heavy branches up to 1 1/2” in diameter may be fed into the chipper chute.

Nozzle/Hose

Vac Handle

(Top Position)

Spring Loaded Pin

(First Hole)

Figure 8

IMPORTANT: The flail screen is located inside the housing in the discharge area. If the flail screen becomes clogged, remove and clean as instructed in

SECTION 5: MAINTAINING YOUR YARD VACUUM. For best performance, it is also important to keep the chipper blade sharp.

WARNING: Do not at any time make any adjustments without first stopping engine and disconnecting spark plug wire.

Using the Hose Assembly

•Place nozzle/hose vac handle in the bottom position on the nozzle to redirect vacuum to the hose assembly. See Figure 9.

•The spring loaded pin must be in the second hole of the hose adapter to operate the hose assembly.

•Unhook the hose from upper handle bracket and grasp the hose handle to guide while vacuuming yard waste such as leaves or pine needles in hard to reach places.

Nozzle/Hose

Vac Handle

(Bottom Position)

Spring Loaded Pin

(Second Hole)

Figure 9

9

Page 8 Page 10
Page 9
Image 9
Troy-Bilt 24B-060F063, 24C-060F063 manual Using the Nozzle Vacuum, Using the Hose Assembly
Page 8 Page 10

24B-060F063, 24C-060F063 specifications

The Troy-Bilt 24C-060F063 and 24B-060F063 are remarkable string trimmers known for their power, versatility, and user-friendly designs. These tools are essential for maintaining a well-groomed lawn and tackling tough landscaping tasks, providing an array of features that make them popular among homeowners and professionals alike.

One of the main features of both models is their lightweight construction, which allows for easy maneuverability while trimming. The trimmers are equipped with a 25cc 2-cycle engine, delivering robust performance and enabling users to handle thick grass and weeds without difficulty. The combination of power and efficiency ensures that users can complete their tasks quickly and effectively.

Equipped with a straight shaft design, both the 24C-060F063 and 24B-060F063 provide extended reach, making it easier to access hard-to-reach areas such as under benches, shrubs, and along fences. This design also ensures that users can maintain a comfortable posture during operation, reducing the risk of fatigue.

The bump head feature allows for quick and easy line advancement, ensuring that users spend less time preparing their tools and more time working. With a simple bump on the ground, users can release additional line when needed, streamlining the trimming process.

Troy-Bilt has incorporated their Easy Start technology, which significantly reduces the effort required to start the engine. This feature is particularly beneficial for users who may struggle with traditional starting methods, making the trimmers accessible to a wider range of people.

Another noteworthy characteristic of these trimmers is their versatility. Both models support a variety of attachments, transforming them into multi-functional tools ready to tackle a range of landscaping tasks such as edging, cultivating, and even pruning. This adaptability offers users the convenience of using one tool for multiple applications.

Additionally, the trimmers feature ergonomic handles designed for comfort and grip, reducing strain on the hands and arms during extended use. With adjustable settings, users can customize the trimmers to suit their preferences, enhancing the overall efficiency of the task.

In summary, the Troy-Bilt 24C-060F063 and 24B-060F063 string trimmers stand out in the market due to their powerful engines, ease of use, and versatility. With their lightweight design, efficient bump head line feed, and innovative starting technology, they provide an excellent solution for anyone looking to maintain a beautiful landscape with minimal effort.
Top Page Image Contents