Troy-Bilt 24B-060F063 Know Your Yard Vacuum, Attaching The Blower Chute If Equipped, Bag Handle

Models: 24B-060F063 24C-060F063

1 14
Download 14 pages 3 Kb
Page 7
Image 7
Attaching The Blower Chute (If Equipped)

Attaching The Blower Chute (If Equipped)

NOTE: The blower chute is an optional feature on some model yard vacuums. It is NOT standard equipment. If your unit is not equipped with a blower chute, contact Customer Support as instructed on page 2 for information regarding price and availability.

Grasp blower chute with one hand and slide locking rod on mounting bracket with other hand toward engine. Use end of mounting bracket as leverage when sliding the locking rod. See Figure 5.

Slip blower chute over rim of the discharge opening and release locking rod to secure chute in place. Make sure the safety switch button is fully depressed by the front tab on the blower chute.

Raise the nozzle height to the highest setting when using the blower chute. Refer to nozzle height adjustment in the OPERATION section.

 

 

Blower

 

 

Chute

 

Front

 

Safety

Tab

Locking

Switch

 

Rod

Button

 

 

Locking

 

 

Rod

 

 

Figure 5

SECTION 3: KNOW YOUR YARD VACUUM

 

Starter Handle

 

Bag

 

Side Bracket

 

Bag Handle

 

Handle Bracket

 

Hose Handle

Nozzle/Hose

Vac Handle

 

Hose Assembly

Chipper Chute

Blower Chute*

Nozzle

 

Side Hanger

 

Bracket

 

Nozzle Height

 

Adjustment Lever

 

 

*If Equipped

Figure 6

Read this operator’s manual and safety rules before operating your Yard Vacuum. Compare the illustrations in Figure 6 with your unit to familiarize yourself with the location of various controls and adjustments.

WARNING: The operation of any Yard Vacuum can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses, provided with the Yard Vacuum, for operating this equipment or while performing any adjustments or repairs on it.

Starter Handle

The starter handle is attached to the right upper handle. Stand behind unit and pull the starter handle to start engine.

Bag

Collects shredded material fed through the chipper chute or vacuumed through the nozzle or hose.

Bag Handle

Used to grasp bag in order to assist in attaching, removing, and emptying bag.

7

Page 7
Image 7
Troy-Bilt 24B-060F063 Know Your Yard Vacuum, Attaching The Blower Chute If Equipped, Starter Handle, Bag Handle, Figure