2

Safe

Operation

WARNING: Engine Exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Practices

WARNING

This symbol points out important safety instructions which, if not followed, could endanger the per- sonal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol, HEED

ITS WARNING!

Your Responsibility

Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult.

4.Never allow adults to operate this machine without proper instruction.

5.Thrown objects can cause serious personal injury. Plan your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like.

6.Keep bystanders, helpers, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

7.Exercise caution to avoid slipping or falling, especially when operating in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/impeller.

2.Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Do not operate without wearing adequate winter outer gar- ments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

4.Use a grounded three-wire extension cord and receptacle for all units with electric start engines.

5.Adjust collector housing height to clear gravel or crushed rock surfaces.

6.Disengage all control levers before starting the engine.

7.Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual.

8.Let engine and machine adjust to outdoor temperature before starting to clear snow.

Safe Handling of Gasoline

To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refuel- ing.

f.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equip- ment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.).

j.Allow machine to cool at least 5 minutes before storing.

Page 4
Image 4
Troy-Bilt 31AE6GKF500 Safe Operation Practices, Training, Preparation, Your Responsibility, Safe Handling of Gasoline

31AE6GKF500 specifications

The Troy-Bilt 31AE6GKF500 is a versatile and efficient tiller designed to meet the needs of both novice and experienced gardeners. As a robust piece of equipment, it combines powerful performance with user-friendly features, making it a popular choice for those looking to cultivate their gardens with ease.

One of the standout features of the Troy-Bilt 31AE6GKF500 is its powerful engine. Equipped with a reliable 4-cycle engine, this tiller delivers ample torque and efficient fuel consumption, ensuring that users can tackle tough soil conditions without compromising on performance. The tiller's self-propelled design further enhances its usability, allowing users to navigate effortlessly through their garden beds while maintaining optimal control.

The Troy-Bilt 31AE6GKF500 features a sturdy set of rotatable tines that can reach a depth of up to 6 inches, making it suitable for various soil types and gardening tasks. These tines can be easily adjusted for width, allowing gardeners to customize their tilling experience based on the size of their garden. With a tilling width of 16 inches, this tiller can cover substantial ground, saving time and effort while preparing soil for planting.

User comfort is prioritized in the design of the Troy-Bilt 31AE6GKF500. It boasts an ergonomically designed handle that can be easily adjusted to accommodate different user heights, reducing fatigue during extended use. Additionally, the adjustable handlebar can be folded down for convenient storage, making it an ideal choice for those with limited space.

Another noteworthy characteristic of this tiller is its durable construction. Built with high-quality materials, the Troy-Bilt 31AE6GKF500 promises longevity, ensuring that it can withstand the rigors of frequent gardening tasks. Its compact design enhances its maneuverability, making it easy to operate in tight corners and small spaces.

Safety features are integral to the design of the Troy-Bilt 31AE6GKF500. The tiller comes equipped with a safety switch that prevents accidental starts, giving users peace of mind during operation.

In conclusion, the Troy-Bilt 31AE6GKF500 is an efficient and reliable tiller that caters to the needs of gardeners looking for a powerful and user-friendly gardening tool. With its robust engine, adjustable tines, ergonomic design, and safety features, it stands out as a top choice for both amateur and seasoned gardeners alike.