Troy-Bilt 3310XP Controls and Features, Forward, Reverse, Augers, Skid Shoes, Chute Assembly, Speed Selector Lever, Augers, Headlight, Skid Shoe, Clean-OutTool, Chute Assembly

Controls and Features 4

	Wheel Drive Control
Headlight	Speed Selector Lever
	Two Way Chute Pitch Control™
	Auger Control

	Wheel Steering Control
Chute Assembly	Chute Directional Control

Clean-Out Tool

Augers

Skid Shoe

NOTE: For detailed information on all engine controls, refer to the separate Engine Operator’s Manual supplied with this unit.

Speed Selector Lever

The speed selector lever is located in the right side of the handle panel and is used to determine ground speed and direction of travel.

Forward

There are six forward (F) speeds. Position one (1) is the slowest and position six (6) is the fastest.

Reverse

There are two reverse (R) speeds. One (R1) is the slower and two (R2) is the faster.

Augers

When engaged, the augers rotate and draw snow into the auger housing.

Chute Assembly

Snow drawn into the auger housing is discharged out the chute assembly.

Skid Shoes

Position the skid shoes based on surface conditions. Adjust upward for hard-packed snow. Adjust downward when operating on gravel or crushed rock surfaces.

11