19.Shut the engine off and wait until the blade comes to a complete stop before removing the grass catcher or unclog- ging the chute.

The cutting blade continues to rotate for a few seconds after the engine is shut off. Never place any part of the body in the blade area until you are sure the blade has stopped rotating.

20.Never operate mower without proper trail shield, discharge cover, grass catcher, blade control handle or other safety protective devices in place and working. Never operate mower with damaged safety devices. Failure to do so can result in personal injury.

21.Muffler and engine become hot and can cause a burn. Do not touch.

22.Only use parts and accessories made for this machine by manufacturer. Failure to do so can result in personal injury.

23.If situations occur which are not covered in this manual, use care and good judgment. Contact your dealer for assistance.

Slope Operation

Slopes are a major factor related to slip and fall accidents, which can result in severe injury. Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it. For your safety, use the slope gauge included as part of this manual to measure slopes before operating this unit on a sloped or hilly area. If the slope is greater than 15 degrees, do not mow it.

Do:

1.Mow across the face of slopes; never up and down. Exercise extreme caution when changing direction on slopes.

2.Watch for holes, ruts, rocks, hidden objects, or bumps which can cause you to slip or trip. Tall grass can hide obstacles.

3.Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel you are losing your balance, release the blade control handle immediately, and the blade will stop rotating within 3 seconds.

Do Not:

1.Do not mow near drop-offs, ditches or embankments, you could lose your footing or balance.

2.Do not mow slopes greater than 15 degrees as shown on the slope gauge.

3.Do not mow on wet grass. Unstable footing could cause slipping.

Service

Safe Handling Of Gasoline:

1.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. Wash your skin and change clothes immediately.

2.Use only an approved gasoline container.

3.Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

4.Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

5.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

6.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

7.Never fuel machine indoor because flammable vapors will accumulate in the area.

8.Never remove gas cap or add fuel while engine is hot or running. Allow engine to cool at least two minutes before refueling.

9.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide for fuel expansion.

10.Replace gasoline cap and tighten securely.

11.If gasoline is spilled, wipe it off the engine and equipment. Move unit to another area. Wait 5 minutes before starting engine.

12.Never store the machine or fuel container near an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

13.To reduce fire hazard, keep mower free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

14.Allow a mower to cool at least 5 minutes before storing.

General Service:

1.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

2.Before cleaning, repairing, or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

3.Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., bent, cracked, worn) Replace blade with the original equipment manufacture’s (O.E.M.) blade only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

4.Mower blades are sharp and can cut. Wrap the blade or wear gloves, and use extra caution when servicing them.

5.Keep all nuts, bolts, and screws tight to be sure the equip- ment is in safe working condition.

6.Never tamper with safety devices. Check their proper operation regularly.

7.After striking a foreign object, stop the engine, discon- nect the spark plug wire and ground against the engine. Thoroughly inspect the mower for any damage. Repair the damage before starting and operating the mower.

8.Never attempt to make a wheel or cutting height adjust- ment while the engine is running.

9.Grass catcher components, discharge cover, and trail shield are subject to wear and damage which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and re- place immediately with original equipment manufacturer’s (O.E.M.) parts only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

10.Do not change the engine governor setting or over-rev the engine. The governor controls the maximum safe operating speed of the engine.

11.Maintain or replace safety labels, as necessary.

12.Observe proper disposal laws and regulations. Improper disposal of fluids and materials can harm the environment.

2

Safe

Operation

Practices

WARNING

This symbol points out important safety instructions, which if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this man- ual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.

HEED IT’S WARNING!

Your Responsibility

Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.



Page 5
Image 5
Troy-Bilt 420 warranty Slope Operation

420 specifications

The Troy-Bilt 420 is an impressive addition to the lineup of outdoor power equipment, specifically designed for homeowners seeking exceptional performance in lawn care and maintenance. This Troy-Bilt product stands out due to its robust features, advanced technologies, and user-friendly characteristics, making it a reliable choice for gardening enthusiasts.

One of the main features of the Troy-Bilt 420 is its powerful engine. Equipped with a 420cc engine, it delivers ample power for a variety of tasks, including tilling, mowing, and snow removal. This high-performance engine is designed to provide optimal torque and efficiency, ensuring that you can tackle even the toughest jobs with ease.

Another key characteristic of the Troy-Bilt 420 is its innovative tilling capability. The tiller boasts a wide tilling width of 24 inches, enabling you to cover larger areas in a shorter amount of time. Additionally, it features adjustable tilling depths, allowing users to customize their tilling experience based on the specific needs of their soil and garden. This versatility is essential for achieving effective soil aeration and preparation for planting.

In terms of technology, the Troy-Bilt 420 features a cushioned grip handle for enhanced comfort during extended use. This ergonomic design reduces muscle fatigue and allows for better control of the tiller, ensuring precision in your gardening tasks. The tiller also incorporates a self-propelled drive system, which not only enhances ease of use but also boosts productivity. This means you can focus on your gardening without having to struggle to push or pull the equipment.

The durability of the Troy-Bilt 420 is evident in its construction. Built with high-quality materials, it is designed to withstand the rigors of outdoor use, providing longevity and reliability. Its sturdy design ensures stability during operation, while the heavy-duty tines offer efficient tilling performance.

Finally, maintenance of the Troy-Bilt 420 is straightforward, thanks to accessible components and clear instructions. This design consideration allows homeowners to easily perform routine checks and servicing, which is crucial to keep the equipment running at peak performance.

Overall, the Troy-Bilt 420 combines power, versatility, and user-friendly features, making it an ideal choice for anyone looking to enhance their lawn care routine. Whether you're an experienced gardener or a novice, the Troy-Bilt 420 proves to be a dependable tool that can help you achieve a thriving garden and a well-maintained landscape.