![Attaching Side-Discharge Chute](/images/new-backgrounds/85989/8598917x1.webp)
Rear Discharge Door |
Grass Catcher |
Figure 9
•To remove the grass catcher, lift the rear discharge door on the mower, lift the grass catcher up and off the pivot rod. Release the rear discharge door.
Attaching Side-Discharge Chute
•Remove the grass catcher and let the discharge door close.
•On the right side of the mower, lift the mulching plug and slide the two hooks of the
IMPORTANT: Do not remove the mulching plug at any time, even when you are not mulching.
Mulching |
Plug |
Hinge |
Pin |
Side |
Chute |
Deflector |
Figure 10
Using Mulch Plug
•Lift the mulch plug and remove the discharge chute up and away from the mower. Let mulch plug rest against the deck. Operate mower without the grass catcher. Refer to page 11.
SECTION 4: KNOW YOUR LAWN MOWER
| Blade Control Handle | |
| Grass Catcher | |
| Rear Cutting | |
| Height Adjuster | |
| Lever | |
Recoil | Front Cutting | |
Starter | ||
Height Adjuster | ||
| ||
| Lever | |
| ||
Chute |
| |
| Mulching | |
| Plug |
Figure 11
Read this operator’s manual and safety rules before operating your lawn mower. Compare the illustration in Figure 11 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
WARNING: The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.
Blade Control Handle
The blade control handle is located on the upper handle of the mower. The blade control handle must be depressed in order to operate the unit. Release blade control handle to stop engine and blade.
WARNING: This blade control mechanism is a safety device. Never attempt to bypass its operations.
Cutting Height Adjustment Levers
These levers are located on each wheel and are used to adjust the cutting height. These levers have to be at the same relative position to ensure uniform cut.
Recoil Starter
The recoil starter is attached to the right upper handle. Stand behind the unit and pull the recoil starter rope to start the unit.
9