moving partsto come to a complete stop, disconnectspark plug wire and move wire awayfrom

,_ WARNING: Beforeinspecting, cleaning or servicing the machine,shut off engine, wait for all spark plug. Failureto follow these instructions can result in serious personal injury or property

damage.

3. Cleanaround the oil dipstick or oil fill tube (whichever applies) to prevent dirt from falling into the crankcase.

4.Onengines with an oil fill tube, remove the fill cap and add oil (if required) until it reachesthe top of the fill tube. Reinstallthe fill cap.

5.Onengines with a dipstick, remove it and wipe it clean. Reinsertthe dipstick, tighten it securely,and removeit. Add oil as neededto bring the level upto the FULL mark. Wipe dipstick clean each time oil level is checked. Do not overfill. Tighten dipstick securely.

B. To Change the Engine Oil: Changethe engine oil as instructed inthe EngineOwner'sManual.

SPARKPLUGSERVICE

Inspect andcleanor replacethe spark plug after every 100 operating hours or annual- ly. Referto the EngineOwner'sManualfor spark plug service instructions.

In some areas,local law requires using re- sistor spark plugs to suppress ignition sig- nals. If the enginewas originally equipped with a resistor spark plug, use the same type for replacement.

SPARKARRESTERSCREEN SERVICE

If the engine muffler is equipped with a spark arresterscreen, removeand clean it according to the service intervals and in- structions in the EngineOwner'sManual.

THROTTLELEVERADJUSTMENT

If the engine does not respond to various throttle lever settings, refer to the Engine Owner'sManual for service information or contact your local authorized engine deal- er.

WARNING: Operators

shall not tamper with the engine governor settings onthe machine;the governor controls the maximum safeoperating speedto protect the engineand all moving partsfrom damage causedby overspeed. Authorizedservice shall be sought if a problem exists.

CARBURETOR/GOVERNOR CONTROLADJUSTMENTS

Thecarburetor wasadjusted at the factory for best operating speed. Referto the En- gine Owner'sManual for any adjustment information or see your authorizedengine dealer.

The governor controls the maximum safe operating speed and protects the engine andall moving partsfrom damagecaused by overspeeding. Do not tamper with the enginegovernor settings.

OFF-SEASONSTORAGE

When the tiller won'tbe used for an ex- tended period, prepareit for storageas fol- lows:

1.Cleanthe tiller and engine.

2.Do routine tiller lubrication and check for loose parts and hardware.

3.Protect the engine and perform recom- mended engine maintenanceby following the storage instructions found in the En- gine Owner'sManual. Besure to protect the fuel lines, carburetor and fuel tank from gum deposits by removing fuel or by

treating fuel with a fuel stabilizer (follow enginemanufacturer'srecommendations).

4.Store unit in aclean, dry area.

5.Neverstore the tiller with fuel in the fuel tank in an enclosedareawhere gas fumes could reach an open flame or spark, or

where ignition sources are present (space heaters, hot water heaters, furnaces, etc.).

21

Page 20 Page 22
Page 21
Image 21
Troy-Bilt 634A, 634K manual Sparkplugservice, Throttleleveradjustment, Off-Seasonstorage, Store unit in aclean, dry area
Page 20 Page 22

634A, 634K specifications

The Troy-Bilt line of tillers, specifically the 634A, 630C, and 634F models, represents a blend of reliability, power, and advanced engineering designed to meet the needs of avid gardeners and professional landscapers alike. Each model boasts unique features and technologies that enhance performance and usability.

The Troy-Bilt 634A is equipped with a 6.5 HP engine, providing ample power for tackling tough soil conditions. The tiller's 16-inch tilling width allows for efficient breaking up of soil, while its impressive tilling depth of up to 8 inches ensures that garden beds are adequately prepared for planting. The 634A model features a lightweight design, making it easy to maneuver around flower beds and garden rows. Additionally, the adjustable handlebar enhances comfort during operation, accommodating various user heights.

In contrast, the Troy-Bilt 630C offers a slightly different approach. This model is designed for those who seek enhanced control and precision while tilling. It features a 6.75 HP engine and similar tilling capabilities but adds an innovative counter-rotating tilling technology. This feature is particularly useful for breaking up compacted soil and mixing in organic materials, resulting in a well-aerated and fertile garden bed. The 630C also comes equipped with a variety of attachments, allowing users to expand its functionality for different gardening tasks.

The 634F model elevates the line further with its robust frame and advanced features. With a powerful 7 HP engine, it provides optimal performance for larger plots of land. The 634F is designed with a wider tilling width of 18 inches, making it perfect for larger gardens and landscaping projects. Its self-propelled system allows for effortless movement across various terrains, reducing user fatigue. Additionally, the 634F includes a unique automatic depth adjustment feature, enabling gardeners to achieve the desired tilling depth without constant manual adjustments.

Across all three models, Troy-Bilt's commitment to user-friendly design shines through. Features such as easy-to-access controls, durable construction, and stable wheels enhance overall usability. The patented "Forward and Reverse" operating system found in these tillers ensures that gardeners can navigate easily in tight spaces, making them versatile for any gardening situation. The combination of power, advanced technology, and user-focused design makes the Troy-Bilt 634A, 630C, and 634F top choices for those looking to cultivate their garden with ease and efficiency.
Top Page Image Contents