5! 6: CHECKTRAHSMiSSiOH

OIL LEVEL

Thetransmission was filled with gearoil at the factory. However,you should checkthe

gear oil level at this time to makecertain it is correct.

IMPORTANT:Donot operatethe tiller if the gear oil level is low. Doing so will result in severedamageto the transmission com- ponents.

1.With the tiller on level ground, pull the Depth RegulatorLever (FF,Fig. 2-10) back andthen all the way up until the lowest notch in the lever is engaged.

2.Removethe oil fill plug (GG,Fig. 2-11)

from the transmission housing cover and locatethe main drive shaft situated inside

the housing.

3.Thegear oil level is correct if the gear oil is approximately halfway upthe side of the main drive shaft.

4.Ifthe oil level is low, add gear oil by re-

ferring to A. ToCheckthe Transmission dear 0il Level in Section5.

I El-'/: AUU IVlUI UH UIL

Thetiller is shipped withoutoil in the en- gine.

IMPORTANT:Do not start the engine with- out first adding motor oil. Severeengine

damagewill result if the engineis run with- out oil.

1.Referto the separateEngineOwner's Manual for engine oil specifications and capacities.

2.With the tiller on levelground, movethe Depth RegulatorLever(FF,Fig.2-1O)up or down until the engine is level.

3.Add motor oil as describedin the En- gine Owner'sManual.

4.Movethe DepthRegulator Lever all the way down until the highest notch is en- gaged.This placesthe tines in the "travel" position, which allows the tiller to be moved without the tines touching the ground.

_1 El-'8: I.;HEI.;K HAHUWAHE

Checkall nuts and screws for tightness.

STEP g: CHECK AIR PRESSURE IN

TIRES (unitswithpneumatictires)

Checkthe air pressurewith a tire gauge. Deflateor inflatethe tires equally to be- tween 15 PSIand 20 PSI (pounds per square inch). Besure that both tires arein-

flated equally or the unit will pull to one side.

Fig. 2-10:AdjustDepth RegulatorLever.

IMPORTANT: This completesthe assembly steps. Be- fore operatingyour tiller, makesure you readthe follow- ing sections in this Manual,as well as the separateEngineOwner'sManual:

• Section 1: Safety

• Section 3: Featuresand Controls

• Section 4: Operation

Fig. 2-11: Remove gear oil fill plug.

Page 8 Page 10
Page 9
Image 9
Troy-Bilt 634A, 634K manual OIL Level, Tires unitswithpneumatictires, El-/ AUU IVlUI UH UIL
Page 8 Page 10

634A, 634K specifications

The Troy-Bilt line of tillers, specifically the 634A, 630C, and 634F models, represents a blend of reliability, power, and advanced engineering designed to meet the needs of avid gardeners and professional landscapers alike. Each model boasts unique features and technologies that enhance performance and usability.

The Troy-Bilt 634A is equipped with a 6.5 HP engine, providing ample power for tackling tough soil conditions. The tiller's 16-inch tilling width allows for efficient breaking up of soil, while its impressive tilling depth of up to 8 inches ensures that garden beds are adequately prepared for planting. The 634A model features a lightweight design, making it easy to maneuver around flower beds and garden rows. Additionally, the adjustable handlebar enhances comfort during operation, accommodating various user heights.

In contrast, the Troy-Bilt 630C offers a slightly different approach. This model is designed for those who seek enhanced control and precision while tilling. It features a 6.75 HP engine and similar tilling capabilities but adds an innovative counter-rotating tilling technology. This feature is particularly useful for breaking up compacted soil and mixing in organic materials, resulting in a well-aerated and fertile garden bed. The 630C also comes equipped with a variety of attachments, allowing users to expand its functionality for different gardening tasks.

The 634F model elevates the line further with its robust frame and advanced features. With a powerful 7 HP engine, it provides optimal performance for larger plots of land. The 634F is designed with a wider tilling width of 18 inches, making it perfect for larger gardens and landscaping projects. Its self-propelled system allows for effortless movement across various terrains, reducing user fatigue. Additionally, the 634F includes a unique automatic depth adjustment feature, enabling gardeners to achieve the desired tilling depth without constant manual adjustments.

Across all three models, Troy-Bilt's commitment to user-friendly design shines through. Features such as easy-to-access controls, durable construction, and stable wheels enhance overall usability. The patented "Forward and Reverse" operating system found in these tillers ensures that gardeners can navigate easily in tight spaces, making them versatile for any gardening situation. The combination of power, advanced technology, and user-focused design makes the Troy-Bilt 634A, 630C, and 634F top choices for those looking to cultivate their garden with ease and efficiency.
Top Page Image Contents