Safety Decals
For your safety and the safety of others, various safety and operational decals are located on your unit (see Figure
Keep the decals clean and legible at all times. Contact your local service dealer or the factory for replacements if any decals are damaged or missing.
Refer to the Parts List in this manual for decal locations, part numbers and ordering instructions.
Control Description
(on Control Panel)
Tine Warning
Starting Stabilization
Message (on engine)
Warning Messages (on tine hood)
Hot Surfaces⁄Moving Belts
Warning (on belt cover)
Figure 1-2: Location of Safety and Operating Decals
Operating Symbols |
|
|
| R | ||
Varioussymbols(shownhere,withworddescriptions) |
|
| ||||
maybeusedonthetillerandengine. |
| CHOKE | CHOKE | REVERSE | ||
NOTE:Yourunitmaynothaveallofthesymbols. | ||||||
ON | OFF |
| ||||
|
|
|
|
| ROTATING TINES | |
FAST | SLOW | STOP | TILLER DIRECTION | LEVER DIRECTION | ||
WARNING
TO AVOID SERIOUS INJURY:
•READ THE OPERATOR’S MANUAL.
•KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
•KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
•NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
•SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UN- CLOGGING TINES OR MAKING REPAIRS.
•KEEP BYSTANDERS AWAY FROM MACHINE.
•KEEP AWAY FROM ROTATING PARTS.
•USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.
5
