Troy-Bilt 682 Controls and Features

Handlebar Height

Adjustment Lever

Wheels/Tines/PTO

Drive Lever

Forward

Interlock

Levers

Figure 4-1

	Tiller controls and features are described below and illustrated in	Tines/PTO Clutch Lever
	Fig. 4-1.	The Tines/PTO Clutch Lever is used to engage or disengage
	warning! Be familiar with all the controls and	The Tines/PTO Clutch Lever is used to engage or disengage
	warning! Be familiar with all the controls and	power to the transmission.
	their proper operation. Know how to stop the	Depth Regulator Lever
	machine and disengage it quickly.	Depth Regulator Lever
	NOTE: For detailed information on all engine controls refer to the	The Depth Regulator Lever is used to regulate the tilling depth
	seperate Engine Operator’s Manual.	of the tines.

Wheels/Tines/PTO Drive Lever

Use the Wheels/Tones/PTO Drive Lever to engage and disengage power to the transmission.

Handlebar Height Adjustment Lever

The Handlebar Height Adjustment Lever is used to adjust the handlebars to one of two heights.

Forward Interlock Levers

The Forward Interlock Levers are attached under the handlebar grip and will stop the engine if both levers are released.

Wheel Speed Lever

The Wheels speed lever controls the speed at which the wheels spin.

Engine Throttle Lever

Use the throttle lever to adjust engine speed as well as to start and stop the engine.

Keyswitch Starter

The keyswitch starter on electric start models is used to start, run and stop the tiller.