Section 2: Assembly

BB

V

F

Figure 2-4A: Attach wheel drive control rod to lever.

1.Remove the vinyl grip (B, Figure 2-6) from the gear select lever (I). Place the wood edge against the edge of the grip and slowly pull off the grip.

2.Insert nylon bushing (Z, Figure 2-6) up into console (L).

3.Slide spring and washers (J) down onto gear select lever.

4.Insert gear select lever (I) up through nylon bushing (Z) in handlebar console

(L). Guide pin (K) on gear select lever into groove in shift quadrant (P).

5.Hold lower part of gear select lever (I, Figure 2-7) against bracket (M). Position retaining plate (N), removed earlier, as shown in Figure 2-7 (plate below bracket). Secure plate with two 1/4"-20 x 1/2" screws (O) and 1/4”-20 locknuts re- moved earlier.

6.Slide grip (B, Figure 2-6) back onto gear select lever (I).

7.Rotate gear select lever (I, Figures 2-

6& 2-7) clockwise until spur (K - short rod) on gear select rod stops in the neu- tral position detent on the shift pattern quadrant (Figure 2-6).

8.Move shift arm (X, Figure 2-7) from side to side as necessary into each trans- mission gear detent until transmission is in neutral.

NOTE: Moving shift arm (X) all the way to the left, and then one notch back to the right, should put transmission into neu- tral. When transmission is in neutral, unit will move freely when pushed while hold- ing the Operator Presence Control lever (W, Figure 2-5) down. If transmission is NOT in neutral, there will be a slight drag on the wheels when pushing unit.

W

 

L

 

J

 

 

 

V

 

 

 

 

 

 

 

 

AA

 

 

 

 

I

E

 

 

 

C

 

 

 

 

F

 

 

 

 

 

 

 

 

CC

H

 

 

 

D

G

N

P

O

M

 

Figure 2-5: Rear view of control rods.

 

B

 

I

Z

L

 

J

P

K

Pin (K) must be in this detent when transmission neutral is adjusted.

Figure 2-6: Detail – Gear Select Lever in Neutral (N) position.

6

Page 7 Page 9
Page 8
Image 8
Troy-Bilt 753B, F753B manual 4A Attach wheel drive control rod to lever
Page 7 Page 9

753B, F753B specifications

The Troy-Bilt 753B, also known as the F753B, stands out as a powerful and versatile outdoor equipment tool designed for homeowners and landscaping professionals alike. This model is particularly recognized for its robust construction and user-friendly features, making yard maintenance a more efficient and enjoyable experience.

One of the prominent features of the Troy-Bilt 753B is its potent 4-cycle engine, which provides the necessary power to tackle a variety of tasks, from trimming and edging to clearing dense grass and weeds. Unlike many 2-cycle engines, the 4-cycle design allows for cleaner operation and reduced emissions, making it an environmentally friendly choice for users. This engine is engineered for easy starting, with a reliable recoil starting system that ensures you're ready to work without the hassle of complicated starting procedures.

The design of the Troy-Bilt 753B includes a well-balanced frame that enhances maneuverability, allowing users to navigate through tight spaces and around obstacles with ease. The adjustable handle system adds to the comfort, enabling users to tailor the machine's height and angle to their personal preference. This attention to ergonomics helps reduce fatigue during extended use.

In terms of versatility, the F753B model is equipped with a pivoting head that allows for multiple cutting angles, providing flexibility for a variety of trimming tasks. Whether you need to trim along fences, landscape borders, or in hard-to-reach areas, this feature makes the job simpler and more efficient.

Another significant attribute of the Troy-Bilt 753B is the bump feed head, which facilitates easy line advancement. When the cutting line wears down, users can simply tap the head on the ground to release more line, ensuring continuous operation without the need to stop and manually feed the line. This innovative feature enhances productivity and minimizes interruption during work.

Moreover, the Troy-Bilt 753B incorporates advanced vibration-dampening technology, which not only improves user comfort but also helps maintain precision during operation. This design innovation allows for longer working periods without the discomfort commonly associated with handheld tools.

Overall, the Troy-Bilt 753B, F753B is a reliable and efficient tool that combines power, user comfort, and cutting-edge features to meet the demands of even the most challenging yard work. Its robust build-quality and thoughtful engineering make it a preferred choice for both casual users and landscaping professionals looking for performance and durability.
Top Page Image Contents