Before Operating Mower

Section

Operation

WARNING

Before operating mower, be sure to read all safety, controls and operating instructions in this Manual and on decals located on machine.

Severe personal injury or property damage could result if this instruction is not followed.

1. Pre-Operation Checklist

With the spark plug wire disconnected from the spark plug, perform the follow- ing checks and services before each use:

1.Review Section 1: “Safety” and Section 3, “Features and Controls” in this man- ual. Read the separate Engine Owner’s Manual provided with the unit.

2.Check unit for loose or missing hard- ware. Tighten or replace as needed.

3.With the unit on level ground, check the engine oil level according to the instructions in the Engine Owner’s Manual. The oil level should be at the FULL mark on the dipstick or up to the top of the oil fill hole on engines with- out a dipstick.

4.Check all levers for freedom of move- ment. Readjust or repair as needed before starting engine.

5.Check that all guards and shields are in place and properly secured.

6.Inspect the area to mowed and re- move any debris which could be picked up and thrown by the mower blades.

7.Check that the mulcher cover is prop- erly installed in the discharge opening (see instructions in this Section).

Remove the mulcher cover to use the side-discharge mowing feature.

8.On electric start models, check that all wiring connections are clean and tight.

9.Check the air pressure in the rear tires (15-20 PSI). Keep tires inflated equally.

DANGER

GASOLINE IS HIGHLY FLAMMABLE AND ITS VAPORS ARE EXPLOSIVE. To help prevent severe personal injury or prop- erty damage:

•Follow gasoline safety rules in Section 1: “Safety” of this Manual and in the separate Engine Owner’s Manual.

•Never remove the gasoline fill cap or add fuel when indoors or when engine is running or still hot. Allow engine to cool at least three (3) minutes before refueling.

•Keep smoking materials, sparks or flames far away from fuel tank and fuel container.

•Store gasoline in an approved fuel container and in a well-ventilated area. Store it safely out of the reach of chil- dren. Do not store gasoline where va- pors can reach an open spark or flame or where ignition sources are present (such as hot water or space heaters, furnaces, clothes dryers, stoves, elec- tric motors, etc.).

•Fill tank to 1/2" below bottom of filler neck to allow for fuel expansion. Wipe up spilled gasoline immediately and move mower away from gasoline fumes before starting engine. Securely re- place caps on fuel tank and fuel container.

10.Remove the fuel cap and check the level of gasoline according to the in- structions in the Engine Owner’s Manual. Clean around fuel fill area before removing fuel cap. Do not check fuel level or add fuel while in- doors or if engine is running or hot. Allow engine to cool for three (3) minutes. Fill the tank with fresh,

clean unleaded gasoline with a mini- mum octane rating of 77. Leave 1/2" of space for fuel expansion. Do not mix oil with gasoline. Do not use gasoline which contains Methanol. See the Engine Owner’s Manual for instructions and precautions regard- ing the use of gasolines that are blended with alcohols or ethers (called oxygenated or reformulated gasolines). Securely replace caps on fuel tank and fuel container.

11.Attach spark plug wire to spark plug after completing above checklist.

2. Set Mower Cutting Height

CAUTION

To avoid personal injury, do not adjust cutting height while wheels or blades are turning. Release all handlebar controls and wait for all motion to stop before adjusting cutting height.

1.Release all controls before adjusting the cutting height.

2.Adjust the cutting height from 1 to 4 inches by rotating the Cutting Height Control lever (Figure 3-4) either clock- wise to raise the height or counterclock- wise to lower the height. Note that ac- tual cutting heights will vary according to grass and soil conditions. A decal and pointer on the right side of the mower deck indicates the height setting.

3.In heavy or tall grass, it is usually better to make the first cut at a higher setting and then make a second cut at the desired height. In rough terrain, a higher setting is recommended as it will minimize the chances of the blade strik- ing the ground or hidden obstructions.

753B, F753B specifications

The Troy-Bilt 753B, also known as the F753B, stands out as a powerful and versatile outdoor equipment tool designed for homeowners and landscaping professionals alike. This model is particularly recognized for its robust construction and user-friendly features, making yard maintenance a more efficient and enjoyable experience.

One of the prominent features of the Troy-Bilt 753B is its potent 4-cycle engine, which provides the necessary power to tackle a variety of tasks, from trimming and edging to clearing dense grass and weeds. Unlike many 2-cycle engines, the 4-cycle design allows for cleaner operation and reduced emissions, making it an environmentally friendly choice for users. This engine is engineered for easy starting, with a reliable recoil starting system that ensures you're ready to work without the hassle of complicated starting procedures.

The design of the Troy-Bilt 753B includes a well-balanced frame that enhances maneuverability, allowing users to navigate through tight spaces and around obstacles with ease. The adjustable handle system adds to the comfort, enabling users to tailor the machine's height and angle to their personal preference. This attention to ergonomics helps reduce fatigue during extended use.

In terms of versatility, the F753B model is equipped with a pivoting head that allows for multiple cutting angles, providing flexibility for a variety of trimming tasks. Whether you need to trim along fences, landscape borders, or in hard-to-reach areas, this feature makes the job simpler and more efficient.

Another significant attribute of the Troy-Bilt 753B is the bump feed head, which facilitates easy line advancement. When the cutting line wears down, users can simply tap the head on the ground to release more line, ensuring continuous operation without the need to stop and manually feed the line. This innovative feature enhances productivity and minimizes interruption during work.

Moreover, the Troy-Bilt 753B incorporates advanced vibration-dampening technology, which not only improves user comfort but also helps maintain precision during operation. This design innovation allows for longer working periods without the discomfort commonly associated with handheld tools.

Overall, the Troy-Bilt 753B, F753B is a reliable and efficient tool that combines power, user comfort, and cutting-edge features to meet the demands of even the most challenging yard work. Its robust build-quality and thoughtful engineering make it a preferred choice for both casual users and landscaping professionals looking for performance and durability.

Troy-Bilt 753B, F753B Before Operating Mower, Pre-Operation Checklist, Set Mower Cutting Height

Models: 753B, F753B

Operation