Troubleshooting | 8 |
| |
|
|
Problem |
| Cause |
| Remedy |
|
|
|
|
|
|
|
|
|
|
Excessive vibration | 1. | Loose parts or damaged auger. | 1. | Stop engine immediately and disconnect |
|
|
|
| spark plug wire. Check for possible damage. |
|
|
|
| Tighten all bolts and nuts. Repair as needed. |
|
|
|
| If the problem persists, take snow thrower to |
|
|
|
| an authorized service dealer. |
|
|
|
|
|
Snow thrower fails to self- | 1. | Auger control cable out of adjustment. | 1. | Adjust auger control cable as shown in |
propel |
|
|
| Maintenance & Adjustments section. |
| 2. Auger drive belt loose or damaged. | 2. | Replace auger drive belt. | |
|
|
|
|
|
Augers continue to rotate | 1. | Auger control cable out of adjustment. | 1. | Adjust auger control cable as shown in |
|
|
|
| Maintenance & Adjustments section. |
|
|
|
|
|
Snow thrower fails to | 1. | Chute assembly clogged. | 1. | Stop engine and disconnect spark plug wire. |
discharge snow |
|
|
| Clean chute and inside of auger housing with |
|
|
|
| |
| 2. | Foreign object lodged in auger. | 2. | Stop engine immediately and disconnect the |
|
|
|
| spark plug wire. Remove object from auger. |
| 3. Auger control cable out of adjustment. | 3. | Adjust auger control cable. | |
| 4. | Auger belt loose or damaged. | 4. | Replace auger belt. |
|
|
|
|
|
17