RULES FOR SAFE OPERATION

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL

MEANING

SYMBOL

MEANING

 

• SAFETY ALERT SYMBOL

 

 

 

 

• ON/OFF STOP CONTROL

 

 

 

 

 

 

Indicates danger, warning or caution. May be used

 

 

 

 

ON / START / RUN

 

in conjunction with other symbols or pictographs.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING - READ OPERATOR'S MANUAL

Read the operator’s manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.

WEAR EYE AND HEARING PROTECTION

WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1 standards and ear protection when operating this unit. Use a full face shield when needed.

HOT SURFACE WARNING

Do not touch a hot muffler, gear housing or cylinder. You may get burned. These parts get extremely hot from operation. They remain hot for a short time after the unit is turned off.

THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY

WARNING: Do not operate without the cutting attachment shield in place. Keep away from the rotating cutting attachment.

ON/OFF STOP CONTROL OFF or STOP

KEEP BYSTANDERS AWAY

WARNING: Keep all bystanders, especially children and pets, at least 50 feet (15 m) from the operating area.

CHOKE CONTROL

1.• FULL choke position

2.• PARTIAL choke position

3.• RUN choke position

UNLEADED FUEL

Always use clean, fresh unleaded fuel

OIL

Refer to operator’s manual for the proper type of oil.

SHARP BLADE

WARNING: Sharp blade on cutting attachment shield. To prevent serious injury, do not touch the line cutting blade.

3