OPERATING INSTRUCTIONS
WARNING: Never use this attachment with an
Use with an electric product could lead to damage to the unit or serious personal injury.
OPERATING THE EZ-LINK™ SYSTEM
The following attachments are also available:
Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBGC
Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBLE
Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . TBAH
Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . . . TBSS
Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBTB
Pole Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBPS
WARNING: When using any attachment, read
and understand that attachment’s specific manual before you begin operation. Follow all applicable safety information.
WARNING: To avoid serious personal injury and
damage to the unit, shut the unit off before removing or installing
2.While firmly holding the
NOTE: Aligning the release button with the guide recess will help installation (Fig. 9).
Release Button
Primary Hole
Upper Shaft Housing
Lower Shaft Housing
Fig. 10
3. Turn the knob clockwise to tighten (Fig. 9).
CAUTION: Lock the release button in the primary
hole and securely tighten the knob before operating this unit.
Removing the Add-On
1.Turn the knob counterclockwise to loosen (Fig. 9).
2.Press and hold the release button (Fig. 9).
3.While firmly holding the upper shaft housing, pull the
Installing the Add-On
NOTE: Place the unit on the ground or on a work bench to make
1. Turn knob counterclockwise to loosen (Fig. 9).
Release Button | |
|
Knob 
Guide Recess
Fig. 9
Knob
Fig. 11
CAUTION:
hole only. Using the wrong hole could lead to personal injury or damage to the unit.
10