Troubleshooting | 8 |
| |
|
|
Problem |
| Cause |
| Remedy |
|
|
|
|
|
Excessive vibration | 1. | Cutting blade loose or unbalanced. | 1. Tighten blade and spindle. | |
| 2. | Damaged or bent cutting blade. | 2. | Replace blade. |
|
|
|
| |
Uneven cut | 1. | Deck not leveled properly. | 1. Perform | |
| 2. | Dull blade. | 2. | Sharpen or replace blade. |
| 3. | Uneven tire pressure. | 3. | Check tire pressure in all four tires. |
|
|
|
| |
Mower will not mulch grass | 1. | Engine speed too low. | 1. Place throttle/choke control lever in FAST | |
(If Equipped w/Mulching Kit) |
|
|
| (rabbit) position. |
| 2. | Wet grass. | 2. | Do not mulch when grass is wet. |
| 3. | Excessively high grass. | 3. | Mow once at a high cutting height, then |
|
|
|
| mow again at desired height or make a |
|
|
|
| narrower cutting swath. |
| 4. | Dull blade. | 4. | Sharpen or replace blade. |
|
|
|
|
|
33