Tunturi Alpha 150 owner manual Welcome to the World Tunturi Exercising, Installation

WELCOME TO THE WORLD OF

TUNTURI EXERCISING!

Your choice shows that you really want to invest in your well-being and condition; it also shows you really value high quality and style. With Tunturi Fitness Equipment, you’ve chosen a high-quality, safe and motivating product as your training partner.

This guide is an essential part of your exercise equipment. Start familiarising yourself with the Tunturi T.I.E. interface by carefully reading this manual. It offers the information you need for both the use and maintenance of your equipment. This manual is well worth keeping, as you may need these instructions later on.

1 . I N S TA L L AT I O N : :

1.1Turning the user interface on and off

3 . P U L S E M E A S U R E M E N T : :

2 . K E Y S : :

2.1Function keys

2.2Rec and OK

2.3Reset

2.4Setting keys -/+

4 . M A I N D I S P L AY : :

5 . F U N C T I O N S : :

5.1Adjusting resistance

5.2Reset

5.3Mode

5.4Prog

5.5Recovery

5.6Pause

5.7Set

6 . M A I N T E N A N C E : :

2 ::

1. INSTALLATION ::

Push the T.I.E. interface module carefully into place at the top of

the handlebar support tube. The loose screws hanging from the metal fastening plate on the bottom of the T.I.E. module must enter the holes at the top end of the handlebar. Make sure that the module is correctly in place and tighten the fastening screws.

1.1 TURNING THE USER INTERFACE ON AND OFF

The user interface turns itself on when the device is connected to the mains current. When the user interface has not been used for five minutes (no heart-rate registered, no keys pressed, no pedalling), it automatically switches itself to energy-saver state. Alpha 150 is returned to its active state by pressing any key, starting to pedal or sending heart-rate signals to the unit. When you restart, Alpha 150 automatically starts from Mode function.

::Protect Alpha 150 from excess sunlight, because that may fade the interface box and surface membrane colours. Please also be careful not to allow Alpha 150 to come into contact with water. A sharp blow may damage the interface.

:: 3