INFORMATION AND WARNINGS
PLEASE READ THIS OWNER’S MANUAL THROUGH CAREFULLY BEFORE ASSEMBLING, USING AND SERVICING THE ROWING MACHINE! FOLLOW THE INSTRUCTIONS DESCRIBED IN THIS MANUAL CAREFULLY.
THE EQUIPMENT HAS BEEN DESIGNED FOR HOME USE ONLY. THE TUNTURI WARRANTY APPLIES ONLY FOR FAULTS AND MALFUNCTIONS IN HOME USE. PLEASE NOTICE THAT THE WARRANTY DOES NOT COVER ANY DAMAGES DUE TO NEGLIGENCE OF ASSEMBLY, ADJUSTMENT OR MAINTENANCE INSTRUCTIONS DESCRIBED IN THIS MANUAL!
NOTE ABOUT YOUR HEALTH
*Before you start any training, consult a physician to check your state of health.
*If you experience nausea, dizziness or other abnormal symptoms while exercising, stop your workout at once and consult a physician.
*To avoid muscular pain and strain, begin each workout by warming up and end it by cooling down. Don’t forget to stretch at the end of the workout.
NOTE ABOUT THE EXERCISING ENVIRONMENT
*The device is not to be used outdoors.
*Place the rowing machine on a firm, level and protected surface to optimaze training comfort and to avoid any damages to the floor beneath the equipment.
*Make sure that the exercising environment has adequate ventilation. To avoid catching cold, do not exercise in a draughty place.
NOTE ABOUT USING THE EQUIPMENT
*If children are allowed to use the device, they should be supervised and taught to use the rowing machine properly, keeping in mind the child’s physical and mental development and their personality.
*Before you start using the rowing machine, make sure that it functions correctly in every way. Do not use a faulty device.
*Only one person may use the device at a time.
*Wear appropriate clothing and shoes when exercising.
*Do not attempt any servicing or adjustment other than those described in this manual. The given instructions must be followed carefully.
*The device must not be used by persons weighing over 110 kg.
ASSEMBLY
Before assembling the device, make sure the following parts are present:
1.Frame
2.Rail
3.Rear support
4.Seat
5.Plastic covers for the rear support
6.Plastic cover for the drawbar holder
7.Assembly kit (contents marked with * in the spare part list)
In case of any problems, contact always your local Tunturi distributor.
METER AND FRAME
Place the frame on the floor so that it faces upward and remove the meter carefully from the frame. Insert two 1,5 V batteries by opening the bottom of the meter cover. Note the - and + signs marked in the case. Replace the cover (R 606: fasten the meter to the frame). Fit the head of the rail carefully in its place. Thread the
The spare part list is at the back of the manual.
Assemble the device as follows :
2
